Initial Device Setup - Toshiba e-STUDIO352 Quick Start Manual

INITIAL DEVICE SETUP

Before starting to use this equipment as a copier, printer, scanner, and facsimile, it is recom-
mended to configure the general device settings on this equipment.
Following table shows the minimum setup required after you power on this equipment at the first
time.
Setup Flow
Setting the Department
Code
Setting the Paper Size for
Each Drawer
Setting the Device Infor-
mation
Setting the Administrator
Password
Setting the Terminal ID
Description/Reference
When you want to manage the counters separately by the department code,
you must register and enable the department code.
Reference: USER FUNCTIONS GUIDE
Chapter 2 "MANAGING COUNTERS"
"4. MANAGING DEPARTMENT CODE"
Specify the paper sizes that are set on each drawer.
Reference: USER FUNCTIONS GUIDE
Chapter 3 "SETTING ITEMS (USER)"
"7. SETTING DRAWER"
Specify the device information.
Reference: USER FUNCTIONS GUIDE
Chapter 4 "SETTING ITEMS (ADMIN)"
"2. SETTING GENERAL FUNCTIONS"
"Setting the Device Information"
As a default, the administrator password has been set as "123456". It is rec-
ommended to change the administrator password to secure the administra-
tor's function menus.
Reference: USER FUNCTIONS GUIDE
Chapter 4 "SETTING ITEMS (ADMIN)"
"2. SETTING GENERAL FUNCTIONS"
"Setting the Administrator Password"
If the optional Fax unit is installed, specify the terminal ID to identify the fax
terminal information.
Reference: USER FUNCTIONS GUIDE
Chapter 4 "SETTING ITEMS (ADMIN)"
"5. SETTING FAX FUNCTIONS"
"Setting the Terminal ID"

INITIAL DEVICE SETUP

39