The Functions In The "Help" Menu; Overview Of "Help" Menu - Siemens SIMATIC RF680M Operating Instructions Manual

The software "RF-MANAGER"
8.3 Application mode "Mobile"
● "READ.XML"
● "Tag_xxx.XML"
"READ.XML" is set as the default value.
8.3.7

The functions in the "Help" menu

8.3.7.1

Overview of "Help" menu

The "Help" menu contains the following function that you can select via "Help":
"About":
Figure 8-18
Using "Help > About" you can obtain information on the following points:
● Information about the device: EU or US version
● Software version
● Manufacturer of the application Siemens AG
54
If the setting "READ.XML" is selected, the same file READ.XML is always updated each
time tag data is read.
If the setting "Tag_xxx.XML" is selected, a new file with the name TAGxxx.XML is created
each time tag data is read. "xxx" is replaced by the ID of the read tag.
If a tag with the same ID is read again, the corresponding file is overwritten.
"Help" menu
Operating Instructions, 06/2011, J31069-D0241-U001-A2-7618
SIMATIC RF680M Mobile Reader