Detector Base With Damp Room Seal Msf 400; Additional Base Msc 420 - Bosch MAGIC.SENS series Product Manual

Product Information MAGIC.SENS -- Product range

6.2. Detector Base with Damp Room Seal MSF 400

For use of the detector in a humid environment, there
is the MSF 400 detector base.
The MSF 400 detector base with integrated seal of
TPE protects the detector reliably against the
penetration of condensed water.
Concealed and surface cable insertion possible.

6.3. Additional Base MSC 420

The additional base MSC 420 was conceived specially
for surface--mounted cable ducts through cable
protection conduits and it has 2 opposing pre--cut
inputs with∅ 20mm and 2 additional opposing and
prepared inputs for up to 28 mm diameter. The
additional base has a diameter of 120mm and a height
of 35mm.
To protect against condensed water penetration, a
seal is placed on the bottom of the MSC 420.
Page 23 of 42
PI -- 34.65d
BDL- -4998121218
A23.en /09.02.2007
ST- -FIR/ PRM1 / deh