Connecting The Power Cord; Binding Cables - Sharp PN-C703B Operation Manual

Caution
• Use only the power cord supplied with the monitor.
• When all connections are complete, connect the power
cord.
1. Plug the power cord (supplied) into the AC input terminal.
2. Plug the power cord (supplied) into the AC power outlet.
TIPS
• Be sure to clamp the power cord (supplied) using the
supplied cable clamp.
The supplied cable clamps (affixing type) can be used to clamp the USB cable and cables connected to the back of the monitor.
Caution
• Attach the supplied cable clamps to a flat surface. Do not attach over a vent.
• Remove any dust or dirt before attaching.
Be sure to clamp the power cord (supplied) and the USB cable using the supplied cable clamp. When clamping the power cord,
take care not to stress the terminal of the power cord. Do not bend the power cord excessively.
The cable clamp also can be used to bundle cables (connected to the back of the monitor) with the USB cable.
14
E

Connecting the Power Cord

Binding Cables

Cable clamp
(affixing type)
Affixing point
Power cord (Supplied)
Affixing point
For power
outlet
1
2
Power cord (Supplied)
AC input terminal
Cable
USB cable