Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Fujitsu SCENICVIEW P17-3P
Summary of Contents for Fujitsu SCENICVIEW P17-3P
- Page 1 Professional Monitor English Operating Manual SCENICVIEW P17-3P/P19-3/P19-3P...
- Page 2 Are there ..any technical problems or other questions that you would like help with? Please contact: • our Hotline/Help Desk (refer to the enclosed Help Desk List or go to: "www.fujitsu-siemens.com/support/") • your sales partner • your sales office The latest information on our products, tips, updates etc.
- Page 4 This manual was produced by Xerox Global Services Published by Fujitsu Siemens Computers GmbH AG 12/07 Edition 1 Order no.: A26361-K1240-Z120-7619...
-
Page 5: Table Of Contents
SCENICVIEW P17-3P/P19-3/P19-3P Operating Manual Your LCD screen... Important notes Getting started Operation Notes on ergonomic colour adjustment Troubleshooting Notes regarding the DIN EN ISO 13406-2 standard Technical data... - Page 6 VESA, DDC and DPMS are registered trademarks of Video Electronics Standards Association. Copyright © Fujitsu Siemens Computers GmbH 2007 All rights reserved, including in particular rights of translation, reproduction by printing, copying or similar methods, in part or in whole.
- Page 7 Contents Contents Your LCD screen............... . Target group .
- Page 8 Contents A26361-K1240-Z120-7619, edition 1...
-
Page 9: Your Lcd Screen
Your LCD screen... Your LCD screen... has a whole range of useful features and functions, e.g.: • TFT display (Thin Film Transistor; active matrix) minimal space requirements thanks to slim casing • • optimum ergonomic characteristics (totally distortion-free, excellent picture definition and colour purity right into the corners) •... -
Page 10: Further Information
• cross-references to an external source, e.g. a web address: For more information, go to "www.fujitsu-siemens.com" • indicates names of CDs and DVDs as well as names and titles of other materials, e.g.: "CD/DVD Drivers & Utilities" or "Safety" manual refers to a key on the keyboard, e.g.:... -
Page 11: Important Notes
Important notes Important notes Importantnotes Notes In this chapter you will find information regarding safety which it is essential to take note of when working with your device. Safety instructions This device complies with the relevant safety regulations for data processing equipment, including electronic office machines for use in an office environment. -
Page 12: Power Cable
Important notes • Use a screen saver with moving images and activate the power management for your monitor to prevent still images from "burning in". • If you operate the device with the swivel arm or wall bracket, it may not be turned by 180°. •... -
Page 13: Fcc Class B Compliance Statement
• Consult the dealer or an experienced radio/TV technician for help. Fujitsu Siemens Computers GmbH is not responsible for any radio or television interference caused by unauthorized modifications of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by Fujitsu Siemens Computers GmbH. -
Page 14: Declaration Of Conformity
Fax No.: (408) 746-8299 We, Fujitsu Siemens Computers Inc., hereby declare that the equipment bearing the trade name and model number specified above was tested confirming to the applicable FCC Rules under the most accurate measurement standards possible, and that all the necessary steps have been taken and are in force to assure that production units of the same equipment will continue to comply with the Commissions requirements. -
Page 15: Energy Star
These savings could also prevent the emission of 20 million tons of carbon dioxide into the atmosphere - the equivalent of 5 million automobiles. As an Energy Star Partner, Fujitsu Siemens Computers GmbH has determined that this product meets the Energy Star guidelines for energy efficiency. -
Page 16: Disposal And Recycling
Fujitsu Siemens Computers Protection Administration Inc.1250E. Arques Avenue Executive Yuan R.O.C. Sunnyvale, CA 94085 U.S.A. "http://recycle.epa.gov.tw" Contact: Schroettle-Henning, Bernd Phone No.: (408) 834-0306 Fax No.: (408) 746-8299 For more information on this subject, please go to "www.fujitsu-siemens.com/recycling". A26361-K1240-Z120-7619, edition 1... -
Page 17: Getting Started
Getting started Getting started Unpacking and checking the delivery The display surface of the device is sensitive to pressure and scratches. Always hold the device by the casing! The complete device package includes: • one monitor • one data cable (D-SUB) •... -
Page 18: Setting Up The Device
Getting started Setting up the device To ensure sufficient ventilation, the air inlet and outlet openings of the device must be kept clear. Setting up an ergonomic video workstation ► Do not position the video workstation opposite a window (1). ►... - Page 19 Getting started ► Position the keyboard where it is easiest to reach (1). ► Position the monitor so that the eye distance to the screen (1) is around 50 cm. 50 cm ► Position the monitor for optimum viewing (1). The monitor should under no circumstances fall outside the permissible viewing space (2).
-
Page 20: Assembly And Disassembly Of The Monitor Base
Getting started Assembly and disassembly of the monitor base Folding out the monitor base On delivery, the lower part of the monitor base is folded up and secured to the monitor by a collar. The monitor base springs up about 5 cm when the collar is released. ►... - Page 21 Getting started ► Proceed according to the four steps (1-4) shown in the illustrations to fold out the monitor base. A26361-K1240-Z120-7619, edition 1...
-
Page 22: Adjusting The Height
Getting started Removing monitor base Before you can use a swivel arm or a wall bracket, you must remove the monitor base. The display surface is susceptible to scratching! ► Switch off the monitor and pull the power plug out of the power socket. ►... -
Page 23: Adjusting The Inclination
Getting started Adjusting the inclination The inclination of the monitor can be adjusted by –2° (forward) and +35° (to the back) from its vertical position. ► Hold the monitor with both hands on the left and right sides of the casing and move it to the desired angle. -
Page 24: Connecting The Device
Getting started Connecting the device Please observe the safety information in "Important notes", Page CE conformance and optimum picture quality are guaranteed only if you use the data cables supplied. ► Switch off the monitor and the computer. ► Disconnect the power plug from the computer. Connecting cables to the monitor The monitor ports are protected by a cover. -
Page 25: Connecting Cables To The Computer
Getting started 3 = Main switch 6 = DVI-D socket (DVI) 4 = Power socket 7 = D-SUB socket (VGA) 5 = AUDIO-IN socket ► Connect one of the connectors of the data cable to the D-SUB connector (9) or the DVI-D connector (8) on the monitor and secure the plug-in connection by tightening the safety screws. -
Page 26: Operation
Operation Operation Switching the device on and off The main switch (3) at the rear and the ON/OFF switch (1) at the front are used for switching the monitor on and off. Press the buttons from the bottom up. The colour of the LED indicator changes as follows: LED indicator Status blue... - Page 27 Operation 1 = ON/OFF switch 2 = Power indicator ► Switch the device on again with the ON/OFF switch (1). Only switch the computer on once you have switched the monitor on. A26361-K1240-Z120-7619, edition 1...
-
Page 28: Notes On Power Management
Operation Notes on power management If your computer is equipped with power management, the monitor can support this function fully. The monitor does not distinguish between the individual power management modes of the computer (standby mode, suspend mode and OFF mode), as it is capable of immediately switching into the mode with the highest energy-saving effect. -
Page 29: Changing The Monitor Settings
Operation Changing the monitor settings When putting the monitor into operation for the first time, the screen display should be optimally adapted to the display adapter used. Changing the monitor settings with the buttons of the control panel The buttons of the control panel have two functions. With the OSD menu not activated, you can make the following settings directly: 1 = SELECT / MENU button 4 = EXIT / AUTO button... -
Page 30: Changing The Monitor Settings Using The Osd Menu
Operation Locking the OSD menu The OSD menu can be locked to prevent accidental or unauthorised changes to the monitor settings. ► Press and hold the SELECT/MENU button for a few seconds while you switch on the monitor with the ON/OFF switch. The Action was executed message appears. - Page 31 Operation ► Press the Forwards / Mute button or the Back / button to highlight a INPUT different icon (e.g. Image adjust). ► Press the SELECT / MENU button to select the highlighted icon. The Image adjust setting window is displayed. The first function H-position is selected.
-
Page 32: Osd Menu Functions
Operation OSD menu functions The OSD menu for analog monitor operation is described below. During digital operation some functions are not available, as they are not required due to the digital transmission technology used. Adjusting the brightness and contrast Call up the Brightness/Contrast setting window Set the brightness of the display Brightness With this function you change the brightness of the background lighting. -
Page 33: Adjusting The Volume
Operation Adjusting the volume Call the Audio setting window Set the volume for playback with the integrated loudspeakers Volume Switch the loudspeakers off or on Mute Setting colour temperature and colours Call the Colour setting window Select the colour temperature The "warmth"... -
Page 34: Displaying Information
Operation Adjusting the functions in the Advanced menu Calling up the Advanced window Selecting the input signal Input select This function allows you to switch the monitor from analog to digital mode and vice versa when two signal sources are connected, provided the graphics card supports this function. -
Page 35: Notes On Ergonomic Colour Adjustment
Notes on ergonomic colour adjustment Notes on ergonomic colour adjustment If you select colours for the monitor in your application programmes, take note of the information below. The primary colours blue and red on a dark background do not produce the minimum required contrast of 3:1 and are therefore not suitable for continuous text and data entry. -
Page 36: Troubleshooting
Troubleshooting Troubleshooting Should an error occur, first check the following points. If the distortion is still not eliminated, the monitor should, if possible, be checked on another computer. If you are unable to solve the problem, please inform our help desk. Having this problem? Check the following points: No screen display... - Page 37 Troubleshooting Having this problem? Check the following points: Picture disturbances (vertical lines) ► Press the EXIT / AUTO button to perform auto-adjustment of the screen. Picture disturbances (horizontal lines, picture ► Press the button to perform EXIT / AUTO noise) auto-adjustment of the screen.
-
Page 38: Notes Regarding The Din En Iso 13406-2 Standard
Notes regarding the DIN EN ISO 13406-2 standard Notes regarding the DIN EN ISO 13406-2 standard Permanently unlit or lit pixels The standard of production techniques today cannot guarantee an absolutely fault-free screen display. A few isolated constant lit or unlit pixels (picture elements) may be present. The maximum permitted number of pixels faults is stipulated in the international standard ISO 13406-2 (Class II). -
Page 39: Technical Data
Technical data Technical data Condensation is not permissible either in the rated range of operation or in the limit range of operation. P17-3P P19-3/P19-3P Dimensions and weight Visible diagonals 43 cm 48 cm Dot pitch 0.264 mm 0.294 cm Image size Width 337.9 mm 376.3 mm... -
Page 40: Vesa-Ddc-Compatible Vga Interface
Technical data Ambient conditions Environment class 3K2, IEC 721 Rated range of operation 15 °C ..35 °C Humidity 20 % ..85 % Limit range of operation 5 °C ..35 °C Humidity 20 % ..85 % VESA-DDC-compatible VGA interface Your monitor is equipped with a VESA-DDC-compatible VGA interface. -
Page 41: Sub D Port
Technical data SUB D port Meaning Video input red Video input green Video input blue Ground Ground Video ground red Video ground green Video ground blue +5 V (DDC) Sync. ground Ground DDC Data H. sync V. sync DDC Clock A26361-K1240-Z120-7619, edition 1... -
Page 42: Dvi-D Port
Technical data DVI-D port Meaning TMDS Data2– TMDS Data2+ TMDS Data 2/4 Shield not connected not connected DDC Clock DDC Data Analog Vertical Sync TMDS Data1– TMDS Data1+ TMDS Data 1/3 Shield not connected not connected +5V Power Ground Hot Plug Detect TMDS Data0–...