Error Messages And Actions - JVC GY-HM650U Instructions Manual

Error Messages and Actions

Warning display on the LCD monitor and viewfinder screen, tally lamp indication and warning tone are as
follows according to the error status.
Memo :
This camera recorder makes use of a microcomputer. Noise interference from external sources may
0
prevent it from functioning properly. When this occurs, turn off and on the power of the camera recorder
again.
Error Message
Turn Power Off Turn Back On
Later
Fan Stop Detected Please
Turn P.Off
Fan Maintenance Required
Getting Overheated. Please
Turn Power Off.
Rec Inhibited
Lost Media Info *
174
Status
System error.
* The warning tone sounds and the
tally lamp blinks twice every
second.
The fan stopped running.
0
The power turns off
0
automatically after about 1
second.
Usage time of the fan has exceeded
9000 hours.
The battery has exceeded the
0
specified temperature.
The power turns off
0
automatically after about 15
second.
[REC] button is pressed when the
write-protect switch of the SD card
is set.
Card is removed while recording
0
is in progress.
Card is removed while
0
formatting is in progress.
Card is removed while restoring
0
is in progress.
Card is removed while adding
0
the OK mark.
Card is removed while writing a
0
setup file.
Card is removed while deleting a
0
clip.
(*: A, B)
Action
Turn off the power, and turn it on
again.
If the error persists, please consult
your nearest service center.
Please consult your nearest service
center.
Check the fan and replace
accordingly. For more details,
please consult your nearest service
center.
Memo :
You can check the usage time of
0
the fan in [System] B [System
Information] B [Fan Hour].
(A P116 [ Fan Hour ] )
Wait until the temperature drops
0
or replace the battery.
If the error persists, please
0
consult your nearest service
center.
Turn off the write-protect switch of
the SD card, or insert a recordable
SD card.
(A P39 [SD Card] )
Restore the card using this camera
recorder.
(A P42 [Restoring the SD Card] )