Panasonic GP-MH310 series Technical Manual page 12

Communications Protocol
Message
Motion Motion Detector OFF
Detector Motion Detector ON
Motion Size Preset
Motion Size Direct
Masking OFF
Masking ON
Mask Area Preset
Mask Area Direct
Sensitivity Move +
Sensitivity Move -
Sensitivity Move Preset
Sensitivity Move Direct
Sensitivity Y-Level +
Sensitivity Y-Level -
Sensitivity Y-Level Preset
Sensitivity Y-Level Direct
Sensitivity Y-Differ +
Sensitivity Y-Differ -
Sensitivity Y-Differ Preset
Sensitivity Y-Differ Direct
Sensitivity Duration +
Sensitivity Duration -
Sensitivity Duration Preset
Sensitivity Duration Direct
Motion Zoom
Motion Interval
Motion by Face Detect
AGC COLOR MAX Gain
B/W MAX Gain
AUTO MAX Gain
AGC ON/OFF
COLOR AGC_OFF Gain +
COLOR AGC_OFF Gain -
B/W AGC_OFF Gain +
B/W AGC_OFF Gain -
Gain Preset
Gain Direct (COLOR)
Gain Direct (B/W)
Digital gain
Aperture OFF
ON
Aperture V +
Aperture V -
Aperture V Preset
Aperture V Direct
Aperture H +
Aperture H -
Aperture H Preset
Aperture H Direct
Gamma OFF
ON
SMART1
SMART2
Mirror OFF
H-Mirror
V-Mirror
HV-Mirror
3D DNR OFF
ON
CS: Checksum
FF: Terminator
A0 08 00 CS FF
A0 08 01 CS FF
A0 08 05 CS FF
A0 08 06 0p 0q CS FF
A0 08 0A CS FF
A0 08 0B CS FF
A0 08 0F CS FF
A0 08 13 0p 0q 0r 0s 0t
0u

CS FF
A0 08 15 CS FF
A0 08 16 CS FF
A0 08 19 CS FF
A0 08 1D 0p CS FF
A0 08 1F CS FF
A0 08 20 CS FF
A0 08 23 CS FF
A0 08 27 0p CS FF
A0 08 29 CS FF
A0 08 2A CS FF
A0 08 2D CS FF
A0 08 31 0p CS FF
A0 08 33 CS FF
A0 08 34 CS FF
A0 08 37 CS FF
A0 08 3B p CS FF
A0 08 3D 0p CS FF
A0 08 42 0p CS FF
A0 08 44 0p CS FF
A0 0A 00 0p CS FF
A0 0A 01 0p CS FF
A0 0A 02 0p CS FF
A0 0A 03 0p CS FF
A0 0A 0B CS FF
A0 0A 0C CS FF
A0 0A 0D CS FF
A0 0A 0E CS FF
A0 0A 0F CS FF
A0 0A 12 0p CS FF
A0 0A 13 0p CS FF
A0 0A 20 0p CS FF
A0 0B 00 CS FF
A0 0B 01 CS FF
A0 0B 0B CS FF
A0 0B 0C CS FF
A0 0B 0F CS FF
A0 0B 13 0p CS FF
A0 0B 15 CS FF
A0 0B 16 CS FF
A0 0B 19 CS FF
A0 0B 1D 0p CS FF
A0 0C 00 CS FF
A0 0C 01 CS FF
A0 0C 02 CS FF
A0 0C 03 CS FF
A0 0D 00 CS FF
A0 0D 01 CS FF
A0 0D 02 CS FF
A0 0D 03 CS FF
A0 0F 00 CS FF
A0 0F 01 CS FF
Motion sensor ON/OFF [Initial value: OFF]
Returns detected motion size settings to factory defaults [Initial value: V-Size: 1, H-Size: 1]
Detected motion size settings p: V-Size (1-16) q: H-Size (1-
16) [Initial value: V-Size: 1, H-Size: 1]
Mask area settings for motion detection ON/OFF
Returns mask area for motion detection to factory defaults
Mask area settings for motion detection
(Note 1)
Motion detection sensitivity settings [Initial value: 5]
* Smaller values increase the sensitivity to small movements.
Returns motion detection sensitivity settings to factory defaults [Initial value: 5]
p: Direct motion detection sensitivity settings 1-10 [Initial value: 5]
Minimum brightness settings for motion detection [Initial value: 5]
* Smaller values increase the sensitivity to movements even on dark screens.
Returns minimum brightness settings for motion detection to factory default [Initial value: 5]
p: Direct minimum brightness settings for motion detection 1-10 [Initial value: 5]
Brightness variation settings for undetected motion [Initial value: 5]
* Smaller values increase the sensitivity to movements even with large brightness variation.
Returns brightness variation settings for undetected motion to factory defaults [Initial value: 5]
p: Direct brightness variation settings for undetected motion 1-10 [Initial value: 5]
Continuous movement time for motion detection [Initial value: 1]
* Smaller values increase the sensitivity to fast moving subjects.
Returns continuous movement time for motion detection to factory defaults [Initial value: 1]
p: Direct continuous movement time for motion detection 1-60 [Initial value: 1]
p: Zoom magnification during motion detection [Initial value: 0]
(0: OFF, 1: x1.4, 2: x2, 3: x2.8, 4: x4, 5: x5.6, 6: x 1/1.4, 7: x 1/2, 8: x 1/2.8, 9: x 1/4, 10: x 1/5.6)
p: Interval time until the start of next detection during motion detection [Initial value: 0]
(0: 5sec, 1: 10sec, 2: 15sec, 3: 20sec, 4: 30sec, 5: 45sec, 6: 1min, 7: 2min, 8: 3min, 9: 4min, 10:
5min)
p: Motion detect with Face Detect (0:OFF, 1:ON)
p: AGC MAX Gain settings during COLOR (0: LOW, 1: NORM[Initial value], 2: MID, 3: HIGH, 4:LOW1,
5:LOW2) [ Add LOW1/LOW2 from Firm Ver.1.01-02]
p: AGC MAX Gain settings during B/W (0: LOW, 1: NORM[Initial value], 2: MID, 3: HIGH, 4:LOW1,
5:LOW2) [ Add LOW1/LOW2 from Firm Ver.1.01-02]
p: AGC MAX Gain settings during AUTO (0:LOW, 1: NORM[Initial value], 2: MID, 3: HIGH, 4:LOW1,
5:LOW2) [ Add LOW/LOW1/LOW2 from Firm Ver.1.01-02]
p: AGC ON/OFF switch (Cannot be set to OFF when D/N AUTO or when SENSE UP setting is
enabled) (0:OFF, 1:ON[Initial value])
Gain settings when COLOR and AGC are OFF [Initial value: 0dB]
Gain settings when B/W and AGC are OFF [Initial value: 0dB]
Returns gain settings when AGC is OFF to factory defaults
(D/N camera is both COLOR and B/W) [Initial value: 0dB]
p: Gain settings when COLOR and AGC are OFF
(0: 0dB[Initial value], 1: 3dB, 2: 6dB, 3: 9dB, 4: 12dB, 5: 15dB, 6: 18dB, 7: 21dB, 8: 24dB, 9: 27dB,
10: 30dB, 11: 33dB, 12: 36dB, 13: 39dB, 14:42dB )
p: Gain settings when B/W and AGC are OFF
(0: 0dB[Initial value], 1: 3dB, 2: 6dB, 3: 9dB, 4: 12dB, 5: 15dB, 6: 18dB, 7: 21dB, 8: 24dB, 9: 27dB,
10: 30dB, 11: 33dB, 12: 36dB, 13: 39dB, 14:42dB )
p: Digital gain ON/OFF (0:OFF, 1:ON) [Initial value: ON]
[Initial value: ON]
Vertical contour compensation settings
Returns vertical contour compensation settings to factory defaults (Initial value:
p: Vertical contour compensation settings 1-15 [Initial value: 8]
Horizontal contour compensation settings [Initial value: 8]
Returns horizontal contour compensation settings to factory defaults [Initial value: 8]
p: Horizontal contour compensation settings 1-15 [Initial value: 8]
Gamma OFF (1)
Gamma ON (0.45)
Gamma SMART1 (Increases the contrast of dark sections)
Gamma SMART2 (Further increases the contrast of dark sections)
Canceling Inversions [Initial value : OFF ]
Horizontal inversion (Cancels vertical inversion)
Vertical inversion (Cancels horizontal inversion)
Vertical and horizontal inversions
3D DNR (1: ON / 0: OFF) [Initial value：ON]
−11−
Model: GP-HB310
(Note 3)
[Initial value: OFF]
(Note 3)
8)