Confirming The Co Line Connection; Turning Off The Pbx - Panasonic KX-TAW848 Installation Manual

2.11 Starting the PBX
• For safety reasons, do not stretch, bend, or pinch the AC cord and the DC cable of
the AC adaptor.
5.
Press the Reset Button with a pointed tool. (The RUN indicator will flash.)
6.
While the RUN indicator is flashing (within about 10 s), return the System Clear Switch to
the "NORMAL" position. Depending on the configuration, initialization takes about 1 min
to 3 min. If successfully executed, the RUN indicator will stop flashing and be kept lit.
All data will be cleared, and the PBX as well as all optional service cards will be initialized to
the default values.
Note
Use the same types of AC adaptor and AC cord that are supplied with the PBX only.
LED Indications
Indication
RUN
ALARM

Confirming the CO Line Connection

After initialization, program the PBX and establish CO line connection, and then use an APT
to confirm it.
To confirm, dial [ ] [3] [7] + CO line number (3 digits) or press S-CO button. You will hear a dial
tone if CO line is available and connected.

Turning off the PBX

For safety reasons, make sure to turn off the power switch before unplugging the PBX. To
unplug, follow the reverse steps to plug it in.
100 Installation Manual
Color Description
Green OFF: Power Off (includes normal reset)
ON: Power On and running (on-line)
Flash (60 times per minute): Power On and starting
Flash (120 times per minute): Power On and resetting before
system initialization
Red OFF: Normal
ON: Alarm (CPU stop, alarm for each card)
Flash: Alarm (MPR file error in restarting)