Dgs-1210-10; Front Panel; Rear Panel; Dgs-1210-10P - D-Link DGS-1210-10 Reference Manual

Dgs-1210 series web smart switch
Hide thumbs Also See for DGS-1210-10:
Table of Contents

Advertisement

1 Product Introduction

DGS-1210-10

8-Port 10/100/1000Mbps plus 2 SFP Slot Web Smart Switch.

Front Panel

Power LED : The Power LED lights up when the Switch is connected to a power source.
Port Link/Act/Speed LED (1-8): The Link/Act/Speed LED flashes, which indicates a network link through
the corresponding port. Blinking indicates that the Switch is either sending or receiving data to the port.
When a port has an amber light, this indicates that the port is running on 10M or 100M. When it has a green
light it is running on 1000M.
Port Link/Act/Speed LED (9F, 10F): The Link/Act/Speed LED flashes, which indicates a network link
through the corresponding port. Blinking indicates that the Switch is either sending or receiving data to the
port. When a port has a green light, this indicates that the port is running on 1000M.
Reset: Press the Reset button for 5 seconds to reset the Switch back to the default settings. All previous
changes will be lost.

Rear Panel

Power: Connect the supplied AC power cable to this port.

DGS-1210-10P

8-Port 10/100/1000Mbps plus 2 SFP Slot Web Smart PoE Switch.
Front Panel
Power LED : The Power LED lights up when the Switch is connected to a power source.
Pwr Max: The Pwr Max LED lights up when the Switch reaches the maximum power budget defined by the
administrator via PoE System Settings page of Web GUI or the default power budget of 78 Watts.
Port Link/Act/Speed LED (1-8, 9F, 10F): The Link/Act/Speed LED flashes, which indicates a network link
through the corresponding port. Blinking indicates that the Switch is either sending or receiving data to the
port. When a port has an amber light, this indicates that the port is running on 10M or 100M. When it has a
green light it is running on 1000M.
Pwr Fail: The Pwr Fail lights up when the Switch PoE is connected to a power failure.
Figure 1.1 – DGS-1210-10 Front Panel
CAUTION: The MiniGBIC ports should use UL listed Optical
Transceiver product, Rated Laser Class I. 3.3Vdc.
Figure 1.2 – DGS-1210-10 Rear Panel
Figure 1.3 – DGS-1210-10P Front Panel
D-Link Web Smart Switch User Manual
3
3

Advertisement

Table of Contents
loading

Table of Contents