Scanning With Dual Functions (Dual Agents) - Toshiba e-STUDIO5540C Scanning Manual

Scanning With Dual Functions (Dual Agents)

When performing a scan operation, you can select 2 of the scan functions at one time.
 This function is available only when the hard disk is installed in the equipment.
 The WS Scan function cannot be selected together with other scan functions.

Scanning with dual functions (Dual Agents)

1
Place the original(s).
For help, refer to the Quick Start Guide.
2
On the control panel, press the [SCAN] button to
enter the SCAN menu.
3
Select a scan function that you want to use.
[e-FILING] — Your scans are saved in the e-Filing boxes.
[FILE] — Your scans are saved as files in the equipment's shared folder or a network folder.
[E-MAIL] — Your scans are sent to specified e-mail addresses.
[USB] — Press this button to store scans to a USB storage device.
The WS Scan function cannot be selected with other scan functions.
4
Make the settings required for the selected scan function, and then press [OK].
 The required settings vary depending on the selected scan function. For instructions on how to
perform settings for each scan function, see the following sections:
 P.22 "Scan to File"
 P.31 "Scan to E-mail"
 P.38 "Scan to USB"
For instructions on how to scan your documents with Scan to e-Filing, refer to the e-Filing Guide.
 Pressing [OK] on the screen for each scan function takes you back to the basic scan menu with the
selected function button marked with an orange line.
Scanning With Dual Functions (Dual Agents)
3 USEFUL FUNCTIONS
79