Internet Connection Setup Wizard - D-Link DCS-5020L User Manual

Section 4 - Configuration
This wizard will guide you through a step-by-step process to
configure your new D-Link Camera and connect the camera
to the Internet. Note that this wizard will not register your
camera with mydlink.com.
Click Next to continue.
Select Automatic IP Address if you want your DHCP server
(usually enabled on your router) to assign the camera its IP
settings. If you want to manually assign the IP settings, select
Static IP Address and enter the following details:
IP Address: Enter an IP address for your camera.
Subnet Mask: Enter the subnet mask of your network.
Default Gateway: Enter the default gateway address. This is
usually the IP address of your router.
Primary DNS:
Enter the primary DNS server's IP address. This
is usually the IP address of your router.
Secondary DNS: Enter the secondary DNS server's IP address.
This is optional.
Click Next to continue.
D-Link DCS-5222L User Manual

Internet Connection Setup Wizard

23