Toshiba e-STUDIO2050C High Security Mode Management Manual page 20

3 THE INITIAL VALUES
[Printer] Sub Menu
Item
General Setting
Restriction for Print
Job
[Print Service] Sub Menu
Item
IPP Print
Enable SSL
FTP Print
Enable FTP Printing
Raw TCP Print
Enable Raw TCP
LPD Print
Enable LPD
[ODCA] Sub Menu
Item
Network
Enable Port
[Security] Menu
[Authentication] Sub Menu
Item
User Authentication Setting
User Authentication
Authentication Type
Enable Guest User
PIN Code Authentication
Use Password
Authentication for Print
Job
18 Precautions on the Initial Values
Initial value for the high
security mode
Only Hold
Initial value for the high
security mode
Enable
Disable
Enable
Enable
Initial value for the high
security mode
Disable
Initial value for the high
security mode
Enable
MFP Local
Authentication
No check mark (Disable)
Disable
Disable
Remarks
Remarks
Although [Enable] is set by default in the same
manner as the normal security mode, be sure
to set it to [Disable].
Although [Enable] is set by default in the same
manner as the normal security mode, be sure
to set it to [Disable].
Remarks
Remarks
You cannot change the setting to "Disable".
The initial value is the same as in the Normal
Security Mode; however, it cannot be set to
"Enable".
Do not change the setting to "Enable".
Do not change the setting to "Enable".