Sony WalkMan MZ-NH700 Operating Instructions Manual page 57

3
Press the 5-way control key towards
VOL –.
The cursor shifts from the letter input
area to the character palette.
The cursor and character alternate.
4
Select a letter using the 5-way control
key and press NENT to enter.
The selected letter appears in the
letter input area and the cursor moves
to the next input position.
The cursor flashes at the next input
position.
The buttons used for character input
and their functions are listed below.
Functions 1)
To move the cursor
in the character
palette.
To select a letter in
the letter input
area.
To enter a letter.
To enter a title.
Operations
5-way control key
up
left
right
down
Turn the jog dial
(move the cursor to
the right or left).
Turn the jog dial.
Press NENT.
Press NENT for 2
seconds or more.
1)
Functions
To insert a blank
space.
To delete a letter.
To cancel labeling. Press x for 2 seconds
To move the cursor
from the letter
input area to the
character palette.
To move the cursor
from the character
palette to the letter
input area.
To display
"_ (space)", ":", "/"
or "–" at the input
position in the
letter input area.
To switch between
capital letters and
.
small letters
1)
Functions of the buttons or the control may
differ depending on when the cursor is in the
letter input area or in the character palette.
5
Repeat step 4, and then enter all
characters of the label name.
6
Press NENT for 2 seconds or more
Re-labeling
You can change the label of the disc, a
group or a track by doing the procedure
for "Labeling" (page 56).
Operations
Press GROUP and
press the 5-way
control key towards
> at the same time.
Press GROUP and
press the control key
towards . at the
same time.
or more.
Press the 5-way
control key towards
VOL –.
Press x.
Press X.
Press X.
.
57