Hard Drive - HP Pavilion 10 Maintenance And Service Manual

Hard drive

Description
500-GB, 5400-rpm
Before removing the hard drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the keyboard (see
5. Remove the base enclosure (see
6. Remove the battery (see
To remove a hard drive:
1. Position the top cover upside down on a flat surface.
Remove the four Phillips 2.5×3.5 screws that secure the hard drive to the top cover (1).
NOTE:
2. Lift the hard drive (2) out of the hard drive bay.
NOTE:
hard drive.
40 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Keyboard on page
Battery on page
Some models may only have two screws.
The top side of the top cover has a small hole that you can push through to release the
25).
Base enclosure on page
36).
Spare part number
778186-005
28).