Entertainment; Connecting To A Network - LG 84WT70PS Owner's Manual

24

ENTERTAINMENT

ENTERTAINMENT

Connecting to a Network

(Depending on model)
Connect the display to a local area network (LAN)
via the LAN port as shown in the following illustra-
tion and set up the network settings.
This monitor only supports a wired network
connection.
After making a physical connection, a small
number of home networks may require the display
network settings to be adjusted. For most home
networks, the display will connect to automatically
without any adjustments.
For detail information, contact your internet pro-
vider or router manual.
Router
@
Cable modem
Internet
Internet
CAUTION
Do not connect a modular phone cable to the
y
LAN port.
Since there are various connection meth-
y
ods, please follow the specifications of your
telecommunication carrier or internet service
provider.
LAN
LAN WAN
ETHERNET
Follow the steps below to set up the network set-
tings. (Even if your display is already connected
automatically, running setup again will not harm
anything.)
1
Press SETTINGS to access the main menus.
2
Press the Navigation buttons to scroll to
WORK and press OK.
3
Press the Navigation buttons to scroll to
work Connection and press
4
Start Connection.
Select
5
Select Complete or Other Network
If you select Complete, you can use wired
network in this connection. If you don't want,
select Other Network
6
Set Expert.
Select
7
Select Wired or Wireless.
8
Select Manual Input
If you select Manual
gation and Number buttons. IP addresses will
need to be input manually.
- Auto Input: Select this if there is a DHCP
server (router) on the Local Area Network
(LAN) via wired connection, the display
will be automatically allocated an IP ad-
dress. If you're using a broadband router
or broadband modem that has a Dynamic
Host Configuration Protocol (DHCP) server
function, the IP address will be automatically
determined.
9
When you are finished, press EXIT.
CAUTION
Network setting menu will not be available
y
until the display is connected to physical
network.
NET-
Net-
OK.
List.
List.
or Auto Input.
Mode, press the Navi-