LG 84WT70PS Owner's Manual page 74

74
CONTROLLING THE MULTIPLE PRODUCT
24. Fail Over Input Select(Command: m, j)
To select fail over mode.
* Only available in Fail Over is Manual mode.
Transmission
[m][j][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][ ]
[Data4][ ][Data5][Cr]
Data1~5(Priority 1~5)
60: RGB
70: DVI-D
90: HDMI1
91: HDMI2
C0: Display Port
* Use 0x70 as data for DVI-D input, 0x90 as data for
HDMI1 input, 0x91 as data for HDMI2 input, 0xC0
as data for DisplayPort input, regardless their input
labels.
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data1][Data2]
[Data3][Data4][Data5][x]
25. Automatic Standby(Command: m, n)
To set the Automatic Standby function.
Transmission
[m][n][ ][Set ID][ ][Data][Cr]
Data
00: Off (The Automatic Standby function is not
used)
01: 4 hours (The set is turned off after four hours)
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
26. PC Power Control(Command: d, t)
To control the PC power if the PC and the monitor
are synchronized.
Transmission
[d][t][ ][Set ID][ ][Data][Cr]
Data
00: Synchronized (When the monitor is off, the PC
is also turned off.)
01: Not synchronized (The monitor is off but the PC
is on.)
Acknowledgement
[t][ ][Set ID][ ][OK/NG][Data][x]
27. PC Power(Command: d, s)
To control the PC power when the PC and the
monitor are not synchronized.
Transmission
[d][s][ ][Set ID][ ][Data][Cr]
Data
00: PC it turned off.
01: PC is turned on.
Acknowledgement
[s][ ][Set ID][ ][OK/NG][Data][x]
28. Picture Mode(Command: d, x)
To adjust the picture mode.
Transmission
[d][x][ ][Set ID][ ][Data][Cr]
Data Structure
Data (Hex)
00 Vivid
01 Standard
02 Cinema
04 Game
05 Expert1
06 Expert2
10 Touch
* If you select Cinema, Expert1, or Expert2,
you cannot adjust Color Temp.
* The touch features only work with the 84WT70
model.
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data][x]
Mode