Assembling The Easy Clean Juicer; Before First Use; Assembling The Easy Clean Juicer Parts - KitchenAid KVJ0333 Instructions Manual

ASSEMBLING THE EASY CLEAN JUICER

Before first use

Your Easy Clean Juicer will come fully
assembled in the box. Before using your
Juicer for the first time, remove the pulp
container first, and then disassemble the
rest of the unit. The pulp container must
be pulled out from the juicer before the lid
can be removed. Once disassembled, wash
all parts and accessories either by hand or
in the dishwasher. See "Care and Cleaning"
section for more detail.
NOTE: This product is designed for
household use only.
Assembling the Easy Clean Juicer_ par_ts
IMPORTANT: Place Juicer on a dry, level countertop with the 2-speed dial facing you. Do not
plug in the Juicer until it is completely assembled.
Place the juicing bowl inside of
1
the bowl housing.
Remove pulp container. Grasp the feed chute
on the Juicer lid and turn it counter-clockwise
to remove it from the Juicer.
Medium pulp
High pulp
Adjust the pulp control collar to the
2
appropriate pulp setting for High,
Medium or Low pulp flow. To adjust,
push in button on collar and rotate
until you hear it lock into place at the
desired setting.
Low pulp
7