REQUIREMENT
• Fix the unit in a horizontal position.
When unit is fixed to slant, it may cause overflow of drainage.
• Install the unit within the dimension according to the figure below.
• Use level gauge or vinyl hose to confirm whether the unit is fix horizontally.
Front view
0 to 5 mm
Set the drain pipe connecting port
side within 5 mm lower than
opposite side.
Remove the part for transportation
Be sure to remove the transportation part before operating the unit.
27-EN
Side view
± 5 mm
Set the front and air back sides are
within 5 mm with each other.
Transportation part
– 14 –
28-EN