Autonomy Livevault; Microsoft Systems Center Operations Manager; Removing And Replacing Hardware Components - HP StoreEasy 1000 Administrator's Manual

hardware platforms, the following ProLiant server manuals may be useful for troubleshooting
assistance:
◦
HP ProLiant Server User Guide or HP ProLiant Server Maintenance and Service Guide
These guides contain specific troubleshooting information for the server.
◦
HP ProLiant Servers Troubleshooting Guide
IMPORTANT:
apply to the storage system. If necessary, check with your HP Support representative for further
assistance.
For HP StoreEasy 1000 Storage guides, go to http://www.hp.com/support/manuals, select
NAS Systems under storage, and select HP StoreEasy 1000 Storage.
For specific ProLiant model documentation, go to:
http://www.hp.com/go/proliantgen8/docs
For software-related components and issues, online help or user guide documentation may
offer troubleshooting assistance. Known issues, workarounds and service releases are addressed
in this guide or the release notes.
Customer notices—Address informational topics about the HP StoreEasy 1000 Storage.
Customer advisories—Address know issues and solutions or workarounds.
NOTE: You must register for Subscriber's Choice to receive customer advisories and notices. See
"Subscription service" (page 99)

Autonomy LiveVault

To use Autonmony LiveVault, which enables data protection in the cloud, see the following website:
http://www.autonomy.com/storeeasy

Microsoft Systems Center Operations Manager

Microsoft Systems Center Operations Manager (SCOM) provides comprehensive monitoring,
performance management, and analysis tools to maintain Windows OS and application platforms.
This solution allows you to monitor Microsoft Windows environments and HP storage products
through a common OpsMgr console. To download HP management packs for Microsoft System
Center Operations Manager, including installation, configuration, and usage documentation, visit
the HP Management Packs for Microsoft Systems Center site at:
www.hp.com/go/storageworks/scom2007

Removing and replacing hardware components

For information on removing and replacing a hardware component, follow the component removal
and replacement instructions in the appropriate storage system user guide. The following list
identifies the ProLiant model for each HP StoreEasy 1000 Storage product:
1430: ProLiant DL320e Gen8
1530: ProLiant ML310e Gen8
1630: ProLiant DL380e Gen8
1830: ProLiant DL380p Gen8
The ProLiant documentation is available at:
http://www.hp.com/go/proliantgen8/docs
94 Troubleshooting, servicing, and maintenance
Some troubleshooting procedures found in ProLiant server guides may not
for more information.