Print Mode - Sharp AL-2060 Operation Manual

USER SETTINGS

Print mode

Program
number
1
2
* The scanning speed increases when the USB 2.0 mode is set to "HI-SPEED",
however, the printing speed does not increase considerably.
66
Program name
FORCED
OUTPUT
USB 2.0 MODE
SWITCH *
Setting codes
(factory default
setting appears
in bold)
When this function is enabled,
printing in printer mode will
automatically continue using a
1: ON
different size of paper if the
2: OFF
specified size of paper runs out
in all trays. This feature does not
function in copy mode.
This sets the USB 2.0 data
transfer speed. To obtain the
fastest speed when using the
USB 2.0 connector, first verify
that your computer meets the
system requirements (operating
system and driver), and then
1: FULL-SPEED
use this program to change the
2: HI-SPEED
USB 2.0 mode to "Hi-Speed".
Note that the setting should not
be changed while running a
TWAIN driver. (For the system
requirements, see "System
requirements for USB 2.0 (Hi-
Speed mode)" (p.57).)
Explanation