LG BNU-BAC Installation & Owner's Manual page 25

2. Setting the Gateway address
① Press the buttons by the following order. And then, when the following menu is displayed on the
BACnet Gateway LCD screen, press the "MENU/SELECT" button to enter the Gateway address.
MENU/
SELECT
② Use the up/down/left/right button (▲,▼,◀,▶) to select the desired address.
MENU/
SELECT
3 After entering the last address, press the "MENU/SELECT" button to set the entered address
to the Gateway address.
(When there is no "MENU/SELECT" button input for 5 seconds, the set value is ignored to return to
the existing address.
MENU/
SELECT
[LCD screen]
[MENU]
Set GW address
[Example for setting the Gateway address]
[Set GW address]
165.186.002.001
[LCD screen after completing the setup]
BACnet Gateway
SW ver. 1.0.0
How to install
[Set GW address]
192.168.000.000
Installation/Owner Manual 25