LG BNU-BAC Installation & Owner's Manual page 26

How to install
3.Setting the net mask address
① Press the buttons by the following order. And then, when the following menu is displayed on the
BACnet Gateway LCD screen, press the "MENU/SELECT" button to enter the net mask address.
MENU/
SELECT
② Use the up/down/left/right button (▲,▼,◀,▶) to select the desired address.
MENU/
SELECT
3 After entering the last address, press the "MENU/SELECT" button to set the entered address
to the net mask address. (When there is no "MENU/SELECT" button input for 5 seconds, the
set value is ignored to return to the existing address.
MENU/
SELECT
26 BACnet Gateway
[LCD screen]
[MENU]
Set Netmask
[Set Netmask]
255.255.255.000
[LCD screen after completing the setup]
BACnet Gateway
SW ver.1.0.0
[Set Netmask]
192.168.000.000