Table Of Contents; Using The Electronic Oven Control - KitchenAid KERC507 Manual

and Caring
Ore
This section tells you, step by step, how to operate all oven functions controlled by
the electronic controls. Carefully follow these instructions, along with the cooking tips
and cleaning information, for successful use of your range.
IN THISSECTION
Using the electronic oven
control ............................................ 15
Oven settings ................................. 17
Setting the clock ............................ 18
Using the kitchen timer ................. 18
Baking or convection baking ....... 20
Roasting ......................................... 21
Adjusting oven temperature ......... 23
Using the temperature probe ....... 24
Using auto set ................................ 27
Broiling ............................................. 28
Convection broiling ........................ 31
Timed cooking ................................. 34
Dehydrating ..................................... 38
Raising (proofing) bread ................ 40
Cooking tips .................................... 41
Cleaning your oven and
controls ............................................ 44
Using and replacing the oven
light(s) .............................................. 46
Using the electronic oven control
For a quick reference guide on using the electronic oven control, see the QuickSet Guide
under the cooktop light cover,
DELAYITIMED _ (--- KITCHEN TIMER
STOP CLOCK OVEN SET
_I T, ME I I SET IIuo"TII ":=I_
Standard oven Convection oven
command pads command pads
[z]r F_
[BEBE]
T
Number pads
Display/clock
=When you first plug in the range, a tone
will sound and the display will show
"88:88." If, after you set the clock
(page 18), the display again shows
"88:88," your electricity was off for a while.
Reset the clock.
• The time display will show "Err" and three
short tones will sound if a time or tempera-
ture is incorrectly entered.
Starting a n operation
After programming a function, you must
press the Start/Enter pad to start the func-
tion. If you do not press the Start/Enter pad
within 5 seconds of programming, "START?"
will show in the display as a reminder.
15