Panasonic KX-FC961CX Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Fax Machine
  5. KX-FC961CX
  6. Operating instructions manual
Panasonic KX-FC961CX Operating Instructions Manual

Panasonic KX-FC961CX Operating Instructions Manual

Thermal fax with dect
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Thermal FAX with DECT

Operating Instructions

KX-FC961CX
Model No.
Please read these operating instructions
before using the unit and save for future
reference.
This unit is compatible with Caller ID. To
use this feature, you must subscribe to
the appropriate service of your service
provider.

Advertisement

Table of Contents
loading

Related Manuals for Panasonic KX-FC961CX

Summary of Contents for Panasonic KX-FC961CX

  • Page 1: Operating Instructions

    Thermal FAX with DECT Operating Instructions KX-FC961CX Model No. Please read these operating instructions before using the unit and save for future reference. This unit is compatible with Caller ID. To use this feature, you must subscribe to the appropriate service of your service...

  • Page 2: Table Of Contents

    Table of Contents 1. Installation and Quick Start information........35 1. Table of Contents 4.10 Editing a caller’s telephone number Accessories before calling back......36 Included accessories......4 4.11 Erasing caller information ....37 Accessory information ......5 4.12 Storing caller information into the Cordless Handset phonebook / one-touch dial ....

  • Page 3: Table Of Contents

    Table of Contents cordless handset ......57 User record Operating from a remote location..60 13.3 User record........102 Pager call..........61 14.Index 9. Programmable Features 14.1 Index..........103 Base Unit Base unit programming ....62 Basic features........63 Advanced features......64 Direct commands for programming features..........67 Cordless handset Cordless handset programming ..

  • Page 4: Installation And Quick Start

    1. Installation and Quick Start 1.1 Included accessories 1 Installation and Quick Start Item Quantity Notes Telephone line cord ---------- Handset ---------- Handset cord ---------- Paper stacker ---------- Recording paper ---------- Cordless handset ---------- Rechargeable battery AAA (R03) size Battery cover ---------- AC adaptor Part number: PQLV200BX...

  • Page 5: Accessory Information

    1. Installation and Quick Start 1.2 Accessory information 1.2.1 Available accessories Model No. Item Specifications/Usage 216 mm × 30 m roll, with 25 mm core KX-A106 Standard thermal recording paper HHR-4EPT Rechargeable batteries 2 rechargeable nickel metal hydride (Ni- MH) batteries KX-TCA121CX Additional cordless ----------...

  • Page 6: Battery Installation / Replacement

    If 7 flashes even after the cordless handset replacement batteries have been charged for 7 hours, the batteries must be replaced. We recommend the 1.3.1 Installing the batteries use of Panasonic batteries. See page 5 for accessory information. Insert the batteries negative (T) terminal Important: first.

  • Page 7: Connections

    5 Handset cord 6 Extension telephone (not included) Caution: L USE ONLY WITH the included Panasonic AC adaptor. L The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.)

  • Page 8: Battery Charge

    15 minutes. about 7 hours before initial use. When charging, the battery icon is shown as Battery life follows. After your Panasonic batteries are fully charged, you can expect the following performance: Ni-MH Batteries (typical 700 mAh) Operation Operating Time...

  • Page 9: Recording Paper

    1. Installation and Quick Start 1.6 Recording paper Close the top cover securely by pushing down on both sides. Open the top cover by pressing the top cover release button (1). Press {FAX/START} to cut the paper. Install the recording paper. Correct Incorrect {FAX/START}...

  • Page 10: Fax Sending / Copying

    1. Installation and Quick Start 1.7 Fax sending / Copying 1.8 Fax receiving Quick Start Open the document feeder tray. Lift the handset or press {SP-PHONE} to answer the call. To receive a fax document, press {FAX/START}. Adjust the document guides (1), and insert the document FACE DOWN.

  • Page 11: Answering Machine

    1. Installation and Quick Start 1.9 Answering machine 1.9.2 Listening to recorded messages 1.9.1 Recording your own The display will show the total number of greeting message recorded messages. {PLAYBACK} {STOP} {MENU} {SET} {A}{B} Press {MENU}. Press {#}, then {5}{5}. Press {A} or {B} to select “RECORD”.

  • Page 12: Important Instructions

    2. Important Instructions B. If liquid has been spilled into the unit. 2 Important Instructions Important safety instructions C. If the unit has been exposed to rain or 2.1 Important safety water. D. If the unit does not work normally by instructions following the operating instructions.
  • Page 13 2. Important Instructions cause the battery(ies) and/or the conductive material to overheat and cause burns. L Charge the battery(ies) provided with or identified for use with this product only in accordance with the instructions and limitations specified in these operating instructions.

  • Page 14: For Best Performance

    2. Important Instructions Environment L Keep the unit away from electrical noise 2.2 For best performance generating devices, such as fluorescent lamps and motors. Battery charge L The unit should be kept free from dust, high L Place the cordless handset on the charger for temperature and vibration.

  • Page 15: Preparation

    3. Preparation 3 Preparation 3.1 Location of Controls 3.1.1 Base unit MESSAGES 10 10 {CALLER ID} {AUTO ANSWER} L To use Caller ID features (page 35, 36). L To turn the auto answer setting ON/OFF (page 45). {STOP} L To stop an operation or programming Station keys session.
  • Page 16 3. Preparation L To adjust volume (page 19). {R} (Redial/Pause) L To access the phonebook (page 30). L To redial one of the last 10 numbers dialled from the cordless handset (page {SET} 24). L To store a setting during programming. L To insert a pause during dialling.

  • Page 17: Display Descriptions Of The Cordless Handset

    3. Preparation Finding the Controls 3.2 Display descriptions of 3.3 Overview the cordless handset 3.3.1 Base unit Display icons Various icons appear on the cordless handset display to indicate the current status of the unit. Display icon Meaning Within range of a base unit L When flashing: Cordless handset is searching for base unit (out of range of...

  • Page 18: Turning The Cordless Handset Power On/Off

    3. Preparation Volume 3.4 Turning the cordless 3.5 Adjusting cordless handset power ON/OFF handset volume 3.4.1 Power ON Press {ih} for about 1 second. L The display will change to the standby mode. {j/OK} {>}{e}{v} {ih} {INT} {ih} Ringer volume 1.

  • Page 19: Adjusting Base Unit Volume

    3. Preparation Initial Programming 3.6 Adjusting base unit 3.7 Dialling mode volume If you cannot dial (page 24, 40), change this setting depending on your telephone line service. 3.7.1 With the cordless handset {j/OK} {SET} {A}{B} {>} {ih} Ringer volume While the unit is idle, press {A} or {B}.

  • Page 20: Date And Time

    3. Preparation Press {A} or {B} repeatedly to display the Example: 10 August, 2005 desired setting. Press {1}{0} {0}{8} {0}{5}. – “TONE” (default): For tone dial service. – “PULSE”: For rotary pulse dial service. Date :10-08-05 Time :00:00 Press {SET}. @=12/24 L The next feature will be displayed.

  • Page 21: Your Logo

    3. Preparation Example: 10 August, 2005 Press {1}{0} {0}{8} {0}{5}. 3.9 Your logo D:10/M:08/Y:05 TIME: 0 0:00 Your logo will be printed on the top of each page sent from your unit. Enter the current hour/minute by selecting 2 The logo can be your name or the name of your digits for each.
  • Page 22 3. Preparation 1. Press {2} 2 times. Keypad Characters LOGO=| G H I 2. Press {4} 3 times. LOGO=B| 3. Press {*}. M N O 6 LOGO=B| 4. Press {5} 3 times. P Q R S 7 LOGO=Bi| T U V 8 To correct a mistake 1.

  • Page 23: Your Fax Number

    3. Preparation 3.10 Your fax number Your fax number will be printed on the top of each page sent from your unit. {STOP} {SET} {<}{>} {MENU} Press {MENU}. SYSTEM SETUP PRESS [( )] Press {<} or {>} repeatedly to display the following.

  • Page 24: Telephone

    4. Telephone 4 Telephone Making and Answering Calls To make a call using the redial list 4.1 Making phone calls The last 10 telephone numbers dialled from the cordless handset are stored in the redial list. 4.1.1 With the cordless handset 1.
  • Page 25 4. Telephone 7. Select “Save”, then press {>}. When finished talking, replace the handset or press {SP-PHONE}. 8. Press {ih}. Speakerphone operation Voice enhancer L For best performance, please note the You can change the tone quality of the receiver following: while you are on a call.

  • Page 26: Answering Phone Calls

    4. Telephone 4.2.2 With the base unit 4.2 Answering phone calls 4.2.1 With the cordless handset {SP-PHONE} {ih} Lift the handset or press {SP-PHONE} when the unit rings. When finished talking, replace the handset {INT} or press {SP-PHONE}. Lift the cordless handset and press {C} or {s} when the unit rings.

  • Page 27: Recording A Telephone Conversation

    4. Telephone 4.3.2 With the base unit Recording 4.3 Recording a telephone {RECORD} conversation You can record a telephone conversation. Recorded conversations are treated as new messages. To listen to the recorded conversation, see page 56, 57. Note: L There may be legal restrictions on recording two-way telephone conversations.

  • Page 28: Cordless Handset Phonebook

    4. Telephone Note: Automatic Dialling L If there is no space to store new items, 4.4 Cordless handset “Memory Full” will be displayed. Erase unnecessary items (page 29). phonebook The cordless handset phonebook allows you to To correct a mistake make calls without having to dial manually.

  • Page 29: Editing A Stored Item

    4. Telephone Press {j/OK}. To search for a name by first character Select the desired category for the item, then (index search) press {>}. 1. Press {k}, then press {R}. Select “Save”, then press {>}. 2. Select “Index Search”, then press {>}. L To edit other items, repeat steps 2 to 10.

  • Page 30: Base Unit Phonebook

    4. Telephone 4.5.2 Making a phone call using the phonebook 4.5 Base unit phonebook Before using this feature, store the desired The base unit phonebook allows you to make names and telephone numbers in the base unit calls without having to dial manually. You can phonebook (page 30).

  • Page 31: One-Touch Dial Feature

    4. Telephone Press {MENU}. L If you do not wish to overwrite, select “Go Back”. Press {#}. 6. Select “Save”, then press {>}. L To cancel erasing, press {STOP}. 7. Press {ih}. Press {SET}. To make a call using a one touch dial key Another method to erase a stored item 1.

  • Page 32: Night Mode

    4. Telephone 2. Select the desired station key. 5. Edit the name. For further details, see the storing procedure on page 31. For station 1: 6. Press {SET}. Press station 1, press {A} or {B} repeatedly L If you do not need to edit the telephone to select “DIAL MODE”, then press {SET}.
  • Page 33 4. Telephone 4.7.1 Cordless handset: Setting the ring delay for night mode This setting allows the cordless handset to ring during night mode if the caller waits long enough. After the selected delay time has passed, the cordless handset will ring. If you select “No {j/OK} Ringing”, the cordless handset will not ring during night mode.

  • Page 34: Caller Id Service

    4. Telephone 5. Press {A} or {B} repeatedly to select “ON” Caller ID or “OFF” (default), then press {SET}. 4.8 Caller ID service 6. Press {MENU}. This unit is compatible with Caller ID service Note: offered by your local telephone company. To L When the night mode is turned ON, “[N]”...

  • Page 35: Viewing And Calling Back Using Caller

    4. Telephone “OUT OF AREA”/“Out of Area”: The caller dialled from an area which does not provide 4.9 Viewing and calling Caller ID service. “PRIVATE CALLER”/“Private Caller”: back using caller The caller requested not to send caller information information. You can easily view caller information and call To confirm caller information by printing back.

  • Page 36: Editing A Caller's Telephone Number Before Calling Back

    4. Telephone To stop viewing To stop viewing Press {ih} after step 2. Press {STOP}. 4.9.2 With the base unit 4.10 Editing a caller’s The display will show the number of new calls in standby mode. telephone number before 10 CALLS Example: 10:59 calling back...

  • Page 37: Erasing Caller Information

    4. Telephone 3. Press {<}. To correct a mistake L To cancel erasing, press {STOP} 2 times. 1. Press {<} or {>} to move the cursor to the 4. Press {SET}. incorrect number. L To erase other items, repeat steps 2 to 4. 2.

  • Page 38: Storing Caller Information Into The Phonebook / One-Touch Dial

    4. Telephone 4.12.2 Into the base unit phonebook 4.12 Storing caller information into the {CALLER ID} phonebook / one-touch dial Important: L This feature is not available if the caller information does not include a telephone number. 4.12.1 Into the cordless handset {A}{B}{>} {MENU} phonebook...

  • Page 39: Voice Mail Service

    4. Telephone Press {A} or {B} repeatedly to display the desired item. Press {MENU}. Select a station key. For station 1: Press station 1, press {A} or {B} repeatedly to select “DIAL MODE”, then press {SET}. For stations 2–5: Press the desired station key. For stations 6–10: Press {LOWER}, then press the desired station key.

  • Page 40: Fax

    5. Fax L Using the “FINE”, “SUPER FINE” and 5 Fax Sending Faxes “PHOTO” settings will increase transmission 5.1 Sending a fax manually time. L If the resolution setting is changed during feeding, it will be effective from the next page. To redial the last number {STOP} 1.

  • Page 41: Documents You Can Send

    5. Fax – Paper with printing on the opposite side that can be seen through the other side, 5.2 Documents you can such as newsprint. L Check that ink, paste or correction fluid has send dried completely. L To send a document with a width of less than Minimum document size 210 mm, we recommend using a copy machine to copy the original document onto...

  • Page 42: Sending A Fax Using The Base Unit Phonebook / One-Touch Dial

    5. Fax L To cancel redialling, press {STOP}. 5.3 Sending a fax using If your unit does not send a fax L Confirm that you have entered the number the base unit phonebook / correctly, and that the number is a fax one-touch dial number.

  • Page 43: Broadcast Transmission

    5. Fax L If you program the wrong item, press {STOP} to erase the item. 5.4 Broadcast Press {SET}. transmission Press {STOP}. By storing base unit phonebook items (page 30) Note: or one-touch dial (page 31) into the broadcast L Confirm the stored items by printing a memory, you can send the same document to broadcast programming list (page 99).
  • Page 44 5. Fax Press {BROADCAST}. L The document will be fed into the unit and scanned into memory. The unit will then send the data to each party, calling each number sequentially. L After transmission, the stored document will be erased from memory automatically, and the unit will automatically print a report (Broadcast sending report).

  • Page 45: Selecting The Way To Use Your Fax Machine

    5. Fax How phone calls and faxes are received Receiving Faxes If the call is a phone call, the fax machine will 5.5 Selecting the way to record the caller’s message automatically. If a fax calling tone is detected, the fax machine use your fax machine will receive the fax automatically.
  • Page 46 5. Fax 5.7.2 Use as a telephone and/or fax (TEL/FAX mode) Your situation You want to answer phone calls yourself and receive faxes automatically without rings. Setup Set the fax machine to TEL/FAX mode (page 48) by pressing {AUTO ANSWER} repeatedly. L The {AUTO ANSWER} indicator on the base unit turns OFF and u disappears from the cordless handset display.

  • Page 47: Receiving A Fax Manually - Auto Answer Off

    5. Fax How to receive phone calls and faxes with 5.8 Receiving a fax the base unit 1. Lift the handset or press {SP-PHONE} to manually – Auto answer answer the call. 2. When: – document reception is required, 5.8.1 Activating TEL mode –...

  • Page 48: Activating Tel/Fax Mode

    5. Fax activation is turned ON beforehand (feature Note: #41 on page 65). The default setting is ON. L Even if you press the auto disconnection code, the fax machine will activate the fax function: To stop receiving – If the extension telephone is connected to Press {STOP}.

  • Page 49: Receiving A Fax Automatically - Auto Answer On

    5. Fax When the unit answers the incoming call, the greeting message will be heard through the 5.9 Receiving a fax speaker. If this feature is not required, turn OFF feature #67 (page 66). automatically – Auto L While an incoming call is being recorded, you answer ON can monitor it through the speaker (feature #67 on page 66).

  • Page 50: Receive Polling (Retrieving A Fax Placed On Another Fax Machine)

    5. Fax messages (page 60), you will know that there are no messages when the unit rings for the 3rd 5.10 Receive polling time. You can then hang up without being charged for the call. (retrieving a fax placed on another fax machine) Answering calls with an extension telephone...

  • Page 51: Junk Fax Prohibitor (Preventing Fax Reception From Undesired Callers)

    5. Fax Press {SET}. L To program other parties, repeat steps 4 5.11 Junk fax prohibitor to 5. (preventing fax reception Press {STOP} to exit the program. from undesired callers) Note: L If there is no space to store new items, “LIST If you subscribe to Caller ID service, this feature FULL”...

  • Page 52: Distinctive Ring Service From Your Phone Company

    6. Distinctive Ring If the incoming call is for the phone number: 6 Distinctive Ring Distinctive Ring – the fax machine will keep on ringing in TEL 6.1 Distinctive Ring mode. – the fax machine will record a voice message service from your phone in TAM/FAX mode.

  • Page 53: Programming The Ring Pattern Assigned For Fax

    6. Distinctive Ring Ring pattern Settings in feature #32 Other triple ring (short- “D” short-long rings) 1st ring 2nd ring 6.4 Programming the ring pattern assigned for fax L Keep the front cover page open for button locations. Set feature #31 to “ON” (page 52). Press {MENU}.

  • Page 54: Copy

    7. Copy 7 Copy Copying 7.1 Making a copy {STOP} {COPY} {A}{B} Open the document feeder tray (1), then adjust the width of the document guides (2) to fit the actual size of the document. Insert the document (up to 10 pages) FACE DOWN until a single beep is heard and the unit grasps the document.

  • Page 55: Answering Machine

    8. Answering Machine 3. Press {A} or {B} to select “CHECK”. 8 Answering Machine Greeting 4. Press {SET}. 8.1 Recording your L The unit will play the greeting message. greeting message 5. Press {MENU}. You can record your own greeting message for 8.1.1 Erasing your recorded TAM/FAX mode, for a maximum of 16 (default) or greeting message...

  • Page 56: Listening To Recorded Messages

    8. Answering Machine Incoming Messages To repeat a message 8.2 Listening to recorded Press {<} while listening to the message. L If you press {<} within 5 seconds of the messages beginning of the message, the previous message will be played. When the unit has recorded new voice L To play back a specific message, press {<} messages:...

  • Page 57: Using The Answering Machine With The

    8. Answering Machine 4. Select “Erase Greeting”, then press {>}. Remote Operation 5. Select “Yes”, then press {>}. 8.3 Using the answering 6. Press {ih}. machine with the cordless 8.3.2 Listening to recorded handset messages When you have new messages: –...
  • Page 58 8. Answering Machine Note: Direct commands L The greeting message is not erased. Turn answering system on To call back (Caller ID service users only) Stop (recording, playback) If caller information was received for the call, you Turn answering system off can call the caller back while listening to a message.
  • Page 59 8. Answering Machine 2. Select “Answer System”, then press {>}. 3. Select “Settings”, then press {>}. 4. Select “Call Screening”, then press {>}. 3. Select “Settings”, then press {>}. 4. Select “Number of Rings”, then press 5. Select “On” or “Off”, then press {>}. {>}.

  • Page 60: Operating From A Remote Location

    8. Answering Machine 8.4 Operating from a remote location You can call your unit from a remote location and access the answering machine. Important: L Activate the remote operation feature by setting the remote operation ID beforehand (feature #11 on page 63). L Set the unit to TAM/FAX mode before going out (page 49).

  • Page 61: Pager Call

    8. Answering Machine mode depending on the setting of feature #73 Press {SET}. (page 66). Enter your pager number and/or pauses (up L You cannot return to TAM/FAX mode in the to 46 digits). same call. Example: 1 202 555 1234PP12345678PP5555# To turn ON the auto answer setting –...

  • Page 62: Programmable Features

    9. Programmable Features L The setting you selected is set, and the 9 Programmable Features Base Unit next feature will be displayed. 9.1 Base unit To exit programming, press {MENU} at any programming time. To program by entering the program code number directly You can select a feature by directly entering its program code (# and a 2-digit number) instead of...

  • Page 63: Basic Features

    9. Programmable Features Code #10: Changing the maximum recording 9.2 Basic features time for incoming messages RECORDING TIME =3 MINUTES [±] Code #01: Setting the date and time “1 MINUTE”: Up to 1 minute. SET DATE & TIME “3 MINUTES” (default): Up to 3 minutes. PRESS SET “GREET ONLY”: The unit plays the greeting See page 20 for details.

  • Page 64: Advanced Features

    9. Programmable Features 8. Press {SET}. 9. Enter the transmission start time. 9.3 Advanced features L If you select 12-hour time entry when you set the date and time (page 20), press Code #22: Setting the journal report to print {*} repeatedly to select “AM”...
  • Page 65 9. Programmable Features See page 52 for details. L This activation code will be required when receiving faxes using an extension Code #32: Setting the ring pattern for fax telephone (page 47). (Distinctive Ring feature) 6. Press {SET}. FAX RING PATTERN 7.
  • Page 66 9. Programmable Features 5. Enter your code (2–4 digits) using the dial “OFF”: Deactivates this feature. keys 0–9, {*}. Code #70: Calling your pager L The default code is “@0”. PAGER CALL 6. Press {SET}. =OFF [±] 7. Press {MENU}. See page 61 for details.

  • Page 67: Direct Commands For Programming Features

    9. Programmable Features Code #77: Changing the receiving mode in 9.4 Direct commands for the auto answer setting AUTO ANSWER programming features =TAM/FAX [±] You can also select the desired setting by directly “TAM/FAX” (default): Telephone Answering entering the program code (# and a 2-digit Machine/Fax mode (page 49) number) and direct command.
  • Page 68 9. Programmable Features – {4}: “4” {#}{3}{2} Fax ring pattern – {5}: “5” – {1}: “A” – {6}: “6” – {2}: “B” – {7}: “7” – {3}: “C” – {4}: “D” {#}{1}{0} Message recording time – {5}: “B-D” (default) – {1}: “1 MINUTE” –...
  • Page 69 9. Programmable Features {#}{6}{7} Call screening – {1}: “ON” (default) – {2}: “OFF” {#}{7}{0} Pager call – {1}: “ON” – {2}: “OFF” (default) L See page 61 for details. {#}{7}{2} Recall time – {0}: “80msec” – {1}: “90msec” – {2}: “100msec” –...

  • Page 70: Cordless Handset Programming

    9. Programmable Features Cordless handset 9.5 Cordless handset programming L When customising, the current item or setting is indicated by ). Menu Sub-menu Sub-menu 2 Default setting Page “Time Settings” “Set Date & Time” ---------- page 20 “Alarm” “Off” page 72 “Ringer Setup”...
  • Page 71 9. Programmable Features Note: L Up to 3 menu items can be displayed at a time. To select a menu item not shown on the current page, scroll up or down by pressing the navigator key, {e} or {v}, respectively.
  • Page 72 9. Programmable Features 9.5.1 Programmable functions L The alarm will sound at the set time even when the ringer is turned OFF. L If you select “Once”, the setting will be changed to “Off” after the alarm sounds. 9.5.3 Ringer options {j/OK} Changing ring tones {ih}...

  • Page 73: Other Options

    PIN. The unit will not reveal the PIN to you. If you forget your PIN, consult 3. Select “Display Setup”, then press {>}. your nearest Panasonic service centre. 4. Select “Contrast”, then press {>}. 1. Press {j/OK}. 5. Press {e} or {v} repeatedly to select the 2.

  • Page 74: Call Options

    9. Programmable Features 9.5.7 Programmable functions Resetting the cordless handset to its using the base unit PIN default settings 1. Press {j/OK}. 2. Select “Handset Setup”, then press {>}. 3. Select “Other Options”, then press {>}. {j/OK} 4. Select “Reset Handset”, then press {>}. 5.
  • Page 75 9. Programmable Features phone numbers to be restricted, and select Storing/changing emergency numbers which cordless handsets will be restricted. These settings determine which telephone Storing area codes here will prevent the numbers can be dialled while the call bar feature restricted cordless handsets from dialling any is ON (page 73).
  • Page 76 L If you change the PIN, please make note of your new PIN. The unit will not reveal the PIN to you. If you forget your PIN, consult your nearest Panasonic service centre. 1. Press {j/OK}. 2. Select “Base Unit Setup”, then press {>}.

  • Page 77: Multi-Unit Operation

    10. Multi-unit Operation 10 Multi-unit Operation Additional Units 10.1 Operating additional 10.2 Registering a units cordless handset to a base unit 10.1.1 Additional cordless The included cordless handset and base unit are handsets preregistered. After purchasing an additional Up to 6 cordless handsets can be registered to a cordless handset, register it to the base unit.
  • Page 78 You can increase the range of the base unit by Enter “0000” (default base unit PIN). using a DECT repeater. Please use only L If you changed the PIN, enter it (page 76). Panasonic DECT repeater. See page 5 for Enter “335”. accessory information. Important: Select “Cancel Handset”, then press...

  • Page 79: Intercom

    10. Multi-unit Operation 5. Select “Repeater Mode”, then press {>}. 6. Select “On” or “Off” (default), then press 10.3 Intercom {>}. Intercom calls can be made between cordless 7. Press {ih}. handsets/base unit in the same radio cell, but not Note: in different radio cells.

  • Page 80: Transferring Calls / Conference Calls

    10. Multi-unit Operation 3. Cordless handset 1: When finished talking, press {ih} or place 10.4 Transferring calls / the cordless handset on the charger. Base unit: Conference calls When finished talking, press {SP-PHONE}, Outside calls can be transferred to the base unit {INTERCOM} or replace the handset.
  • Page 81 10. Multi-unit Operation To transfer a call without speaking to the To transfer a call without speaking to the base unit user cordless handset 2 user After step 1, press {ih} on the cordless After step 1, press {ih} on the cordless handset 1.

  • Page 82: Copying Cordless Handset Phonebook Items

    10. Multi-unit Operation 10.5 Copying cordless handset phonebook items Phonebook items (page 28) can be copied from the cordless handset to the phonebook of another cordless handset. {j/OK} {ih} {>} Copying a stored item 1. Find the desired item (page 28), then press {j/OK}.

  • Page 83: Useful Information

    11. Useful Information 11 Useful Information 11.1 Available character entries for the cordless handset The cordless handset dial keys are used to enter characters and numbers. Each dial key has multiple characters assigned to it. The available character entry modes are, Alphabet, Numeric, Greek, Extended 1, Extended 2, and Cyrillic.
  • Page 84 11. Useful Information L The following are used for both uppercase and lowercase: Extended 2 character table (O) L The following are used for both uppercase and lowercase: Cyrillic character table (P)

  • Page 85: Wall Mounting The Charger

    11. Useful Information 11.2 Wall mounting the charger Connect the AC adaptor. Drive the screws (1) into the wall using the wall template as a guide, then mount the charger securely on the screws. L Fasten the AC adaptor cord around the hooks (2) to prevent it from being disconnected.

  • Page 86: Help

    12. Help 12 Help 12.1 Error messages – Reports If a problem occurs during fax transmission or reception, one of the following messages will be printed on the sending and journal reports (page 40). Message Code Cause & Solution COMMUNICATION ERROR 40-42 L A transmission or reception error occurred.

  • Page 87: Error Messages - Base Unit Display

    12. Help 12.2 Error messages – Base unit display If the unit detects a problem, one or more of the following messages will appear on the display. Display Cause & Solution “BUSY” L The cordless handset is in use. L The cordless handset you are calling is too far from the base unit. “CALL SERVICE”...
  • Page 88 12. Help Display Cause & Solution “REMOVE DOCUMENT” L The document is jammed. Remove the jammed document (page 96). L Press {STOP} to eject the jammed document. “SERIAL ERROR” L There is something wrong with the unit and the base unit will not work.

  • Page 89: When A Function Does Not Work, Check Here

    12. Help Troubleshooting 12.3 When a function does not work, check here If you still have difficulties after following the instructions in this section, reset the unit. Disconnect the power cord and turn OFF the cordless handset. Reconnect the power cord and turn ON the cordless handset.
  • Page 90 12. Help Problem Cause & Solution The base unit beeps. L The recording paper has run out. Press {STOP} to stop the beeps and install recording paper. L The unit has recorded new voice messages. Press {STOP} to stop the beeps and listen to the recorded messages (page 56, 57). I cannot page a cordless L The called cordless handset is too far from the base unit.
  • Page 91 Cancel unused cordless handset registrations from the base unit (page 78). L You entered the wrong PIN. If you forget your PIN, consult your nearest Panasonic service centre. L Locate the cordless handset and the base unit away from other electrical appliances.

  • Page 92: Fax – Sending

    12. Help 12.3.4 Fax – sending Problem Cause & Solution I cannot send documents. L The telephone line cord is connected to the [EXT] jack on the unit. Connect to the [LINE] jack (page 7). L The other party’s fax machine is busy or has run out of recording paper.
  • Page 93 12. Help Problem Cause & Solution The printing quality is L The thermal head is dirty. Clean it (page 97). poor. L Adjust the print contrast using feature #59 (page 66). L If documents can be copied properly, the unit is working normally. The other party may have sent a faint document or there may be something wrong with the other party’s machine.

  • Page 94: If A Power Failure Occurs

    12. Help Problem Cause & Solution I cannot operate the L Another user is using the answering machine, accessing the Caller answering machine with ID list or on an outside call. Wait for the other user to finish. the cordless handset. L A caller is leaving a message.

  • Page 95: Recording Paper Jams

    12. Help Install the recording paper and close the top Jams cover securely by pushing down on both 12.4 Recording paper jams sides (see page 9 for details). Open the top cover by pressing the top cover release button (1). Pull the cutter release lever (1) forward.

  • Page 96: Document Jams - Sending

    12. Help Cleaning 12.5 Document jams – 12.6 Document feeder / sending scanner glass cleaning Clean the document feeder when: Open the top cover by pressing the top cover – Documents frequently misfeed. release button (1) and remove the jammed –...

  • Page 97: Thermal Head Cleaning

    12. Help Close the top cover securely by pushing down on both sides. 12.7 Thermal head cleaning If smudges or black/white lines appear on a copied/received document, check whether there is dust on the thermal head. Clean it to remove the dust.
  • Page 98 12. Help Install the recording paper and close the top cover securely by pushing down on both sides (see page 9 for details).

  • Page 99: General Information

    13. General Information 13 General Information Printed Reports 13.1 Reference lists and reports (Base unit only) You can print out the following lists and reports for your reference. “SETUP LIST”: provides you with the current settings of the base unit programming features (page 63 to page 67). “TEL NO.

  • Page 100: Specifications

    13. General Information ■ Fax memory capacity Specifications Approx. 28 pages of memory 13.2 Specifications transmission/reception (Based on the ITU-T No. 1 Test Chart in standard 13.2.1 Base unit resolution, with original mode.) ■ Voice memory capacity ■ Applicable lines: Approx.
  • Page 101 13. General Information 13.2.2 Cordless handset ■ Standard: DECT (Digital Enhanced Cordless Telecommunications) GAP (Generic Access Profile) ■ Number of channels: 120 Duplex Channels ■ Frequency range: 1.88 GHz to 1.9 GHz ■ Duplex procedure: TDMA (Time Division Multiple Access) ■...

  • Page 102: User Record

    13. General Information User record 13.3 User record For your future reference Date of purchase Serial number (found on the rear of the unit) Dealer’s name and address Dealer’s telephone number Attach your sales receipt here.

  • Page 103: Index

    14. Index Erasing: 30 14. Index Making a phone call: 30 14.1 Index Sending faxes: 42 Storing: 30 # #01 Date and time: 20 Basic features: 63 #02 Your logo: 21 Battery #03 Your fax number: 23 Charge: 8 #04 Sending report: 40, 63 Installation: 6 #06 FAX ring setting: 63 Life: 8...
  • Page 104 14. Index Contrast: 73 Base unit programming: 62 Description: 17 Cordless handset: 70 Language: 73 R Recall: 66, 74 Standby mode: 72 Receiving faxes Distinctive Ring service: 52 Automatically: 49 Document size: 41 Manually: 47 E Emergency call: 75 Receiving reduction: 65 Error messages: 86 Recording Extension telephone: 7, 47...
  • Page 105 14. Index Storing Broadcast: 43 One touch dial: 31 Phonebook: 28, 30 T TAM/FAX mode: 45, 49 TEL/FAX mode: 46, 48 TEL mode: 45, 47 Transferring calls: 80 V Voice enhancer: 25 Volume Base unit: 19 Cordless handset: 18 W Wall mounting: 85...
  • Page 106 Notes...
  • Page 107 Notes...
  • Page 108 Copyright: L This material is copyrighted by Panasonic System Networks Co., Ltd., and may be reproduced for internal use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic System Networks Co., Ltd.

Table of Contents