Front End Pdu Line Cord Plugs; 39Y8934 Front End 220-240Vac / 32A Cord (Iec 309 P+N+G); 39Y8935 Front End 220-240Vac / 63A Cord (Iec 309 P+N+G); 39Y8936 Front End 220Vac / 30A Cord (Ksc 8305 30A) - Lenovo System x PDU Technical Reference

.

Front End PDU Line cord plugs

This section covers all the plugs on each line cord for the Front End PDU which
includes:

39Y8934 Front End 220-240VAC / 32A Cord (IEC 309 P+N+G)

•

39Y8935 Front End 220-240VAC / 63A Cord (IEC 309 P+N+G)

•

39Y8936 Front End 220VAC / 30A Cord (KSC 8305 30A)

•

39Y8937 Front End 230VAC / 32A Cord (AUS/NZ 3112 32A)

•
39Y8934 Front End 220-240VAC / 32A Cord (IEC 309 P+N+G)
IEC 309 P+N+G (2.5m) - 32A 220-240VAC Single Phase
Only a receptacle or a connector is needed to mate with the plug on the PDU input
line cord. See the Additional Plug Information
further details on IEC309.
Note: Note that this is not the same cord as the 40K9612 cord. PDU line cord
connector pin out is different.
Matching receptacle listing 332R6W IP-67 HUBBELL, Hubbell receptacle P/N
HBL332R6W
Matching connector listing 332C6W IP-67 HUBBELL, Hubbell connector P/N
HBL332C6W
Used with: 39Y8934 –
Figure 98: IEC 309 P+N+G 32A single phase plug
160
Front End PDU
on page 191 in this document for