Lenovo System x PDU Technical Reference page 96

.
Input Line Cords
The following input line cords are for connecting the PDU to appropriate power
circuits. This may include for example, the wall or floor outlets to provide power to
the PDU. This PDU will need to be hardwired and has no plug. Refer to the
Voltage DC PDU Line cord and hard wiring
PDU P/N Line Cord
P/N
44T0966 Attached
Note: RF-203P outlet refers to Rong Feng RF-203P DC outlet.
Note: The high-voltage dc power cord that comes with the PDU must be connected to
a properly wired and grounded high-voltage dc power source by a licensed
electrician. Refer to the
Specifications
The following table are specifications for the 44T0966 1U Higher Voltage DC PDU.
Specifications
Input Line Cord Type*
Type
Phase
Outlets types
Power Capacity**
Power Limit per Outlet 15A
Power Limit per PDU
Monitoring/Switching
U Space
Grounding Screw
* For input line cord part numbers refer to the
96
section for additional information.
Feature Orderable Line cord description
Code for
Bundle (PDU
& Line Cord)
A580 Attached 90A DC line cord 90A@240-
380VDC (4.3m) line cord hard wired (i.e. no
plug)
HVDC Line cord and plug
Line cord PN
44T0966
90A/240V-380VDC
-
Six Rong Feng RF-203P DC
21600W
90A
No/No
1U or side pocket
Yes on back panel
section for additional details.
Input Line Cords section.
Higher