6.
Remove one screw (callout 1), release one tab (callout 2), and then slide the guide toward the
front of the product to release it. Remove the guide.
Figure 1-170
7.
Put the product on its side so that the gear cover faces up. Remove three screws (callout 1) and the
gear cover.
Reinstallation tip
reinstallation.
Figure 1-171
3
ENWW
Remove the Tray 2 paper pickup assembly (5 of 10)
1
2
Note the location of the FFC (callout 2) and the shaft (callout 3) for
Remove the Tray 2 paper pickup assembly (6 of 10)
2
1
Removal and replacement procedures
115