Dummy Cover - HP LaserJet PRO M521 Repair Manua

Dummy cover

1.
Before proceeding, remove the following components:
Formatter cover. See
●
2.
Remove one screw (callout 1) and release one tab (callout 2).
Figure 1-22
Reinstallation tip
access to the tab.
3. Remove the dummy cover.
Figure 1-23
ENWW
Formatter cover on page
Remove the dummy cover (1 of 2)
2
1
Disconnect the control-panel cable from the formatter to provide additional
Remove the dummy cover (2 of 2)
18.
Removal and replacement procedures
23