Cartridge-door assembly
1.
Before proceeding, remove the following:
Rear cover assembly. See
●
Left cover. See
●
Tray 1 cover. See
●
TIP:
However, it is easier to remove and reinstall the door assembly when the Tray 1 cover is not
installed.
2.
Remove one spring (callout 1).
Figure 1-41
34
Chapter 1 Removal and replacement
Rear cover assembly on page
Left cover on page
Tray 1 cover on page
The cartridge-door assembly can be removed without removing the Tray 1 cover.
Remove the cartridge-door assembly (1 of 3)
24.
28.
32.
1
ENWW