LG GD1329CGS Owner's Manual page 31

Part 5 PROGRAMMING MODE -
1 1 3 3
Beep volume
Entering set up mode.
You will see LqC1
Press the WHITES & COLORS button
Press the PERM. PRESS or the DELICATES
button until appears in the display.
Press the START button.
Press the PERM. PRESS or the DELICATES
button until appears in the display.
Press the START button.
Display previous value.
Press PERM. PRESS(+) or DELICATES(-) button to select
High or Low or Off.
Press the START button.
The machine sets up the beep volume, then advances to the
next process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• Stack type - 1. Control panel open.
2. Turn on/off toggle switch.
Setup Mode
Button Display
3 1