2.2.9.
LED Array (329), Feed Roller (302)
(2)
(4)
(7)
(10)
(3)
(5)
(6)
(9)
(1) Remove the Scanner Block (321)
(Refer to 2.2.8.).
(2) Remove the Ground Plate (317).
(3) Remove 4 Screws (19).
(4) Release the Harness from the hook.
(5) Remove the LED Bracket (306) Assembly.
(6) Remove 3 LED Clips (307).
(7) Remove the LED Array (329).
Caution:
When reinstalling the LED Array, position the
3 LED Clips at the appropriate locations.
(8) Remove the Gears, Bushings and the Roller
Wire Spring (Refer to 2.2.6.).
(9) Remove 2 P6A Bushings (316).
(10) Remove the Feed Roller (302).
30