1.3. External View (For USA only) Product complies with DHHS Rules 21 CFR Subchapter J in effect at date of manufacture. Manufacturer's Name and Address Factory ID 3 inch 14.6 inch (370 mm) (75 mm) 7 inch 13.2 inch 3.6 inch L TR : 4.8 inch (177 mm) (121 mm)
Page 7
3-Digit number or alphanumeric representation (Except Letters “I” and “O”) For Example: 2AU = UF-790-AU 2AT = UF-590-AB 3LW = UF-780-AU 35S = UF-580-AB Production Facility Production Year Starting with Year 2001, the last 2-digits of the year is represented as: A ~ T...
2 Service Modes 2.1. Service Modes (For Facsimile) 2.1.1. Service Mode 1 (Function Parameter Setting) Function Parameter Table Parameter Selections Function 130 BUSY-ACK • In Busy Selects the signal timing between the BUSY and TIMING • After Busy ACK signal in Printer Interface Mode. (Except UF-580/ •...
2.1.2. Service Mode 9 (System Maintenance) System Maintenance Table Maintenance Mode Description 1:Card → Host FIRMWARE UPDATE (UF-590/790) Updates the firmware in the machine with the Master Firmware Card. 2:PC → Host Updates the firmware in the machine with the Master Firmware from the PC.
2.1.2.1. Operation UF-590/790 9:SYSTEM MAINTENANCE PRESS SET TO SELECT START SET or START SET or START Display card version SET or START FIRMWARE UPDATE(1-2) FIRMWARE UPDATE UF-790AAV1xxxxAU SYSTEM MAINT.(1-8) CLEAR * IN PROGRESS * 1:CARD --> HOST PRESS SET TO START CLEAR 1:FIRMWARE UPDATE CLEAR...
Page 12
UF-580/780 9:SYSTEM MAINTENANCE PRESS SET TO SELECT START SET or START Display card version SET or START FIRMWARE UPDATE UF-580AAV1xxxxAB SYSTEM MAINT.(1-8) Reboot the machine CLEAR * IN PROGRESS * PRESS SET TO START CLEAR 1:FIRMWARE UPDATE after updating * If the card is not installed, SET/START will be refused.