Viewing Information About This Unit (Information Menu); Types Of Information - Yamaha RX-A2010 Owner's Manual

Viewing information about this unit
(Information menu)
You can view information about this unit using the TV screen.
1
Press ON SCREEN.
2
Use the cursor keys to select "Information" and press ENTER.
3
Use the cursor keys ( / ) to select an information type.
4
To exit from the menu, press ON SCREEN.

Types of information

■
Audio Signal
Displays information about the current audio signal.
Format Audio format of the input signal
The number of source channels in the input signal (front/
surround/LFE)
Channel
For example, "5.1 (3/2/0.1)" means 5.1ch in total (3 front
channels, 2 surround channels, and LFE).
Input
Sampling The number of samples per second of the input digital signal
Bitrate The amount of data per second of the input bitstream signal
Dialogue The dialogue normalization level of the input bitstream signal
Output The speaker terminals from which signals are output
• Even when this unit is set to output bitstream signals directly, the signal may be converted depending on
the specifications and settings of the playback device.
■
Video Signal
Displays information about the current video signal.
HDMI Signal Presence or absence of HDMI signal input/output
HDMI Resolution Resolutions of input signal (analog or HDMI) and output signal (HDMI)
Resolutions of input signal (analog) and signal output at the MONITOR
Analog Resolution
OUT jacks (analog)
Errors related to HDMI
HDCP Error: The TV does not support HDCP (High-bandwidth Digital
HDMI Error Content Protection).
Device Over: The number of devices connected to the HDMI OUT jack is
over the limit.
■
HDMI Monitor
Displays information about the TVs connected to the HDMI OUT jacks.
Use the cursor keys ( / ) to switch between "OUT1" and "OUT2".
Interface TV interface
Video Resolution Resolutions supported by the TV
123
En