Efi Diagnostics; Instrument Cluster Trouble Code Display - Polaris 2009 Sportsman XP 850 Service Manual

EFI DIAGNOSTICS

Instrument Cluster Trouble Code Display

Use the following procedure to display diagnostic trouble codes
logged in the ECU if the Check Engine (MIL) icon is
illuminated on the instrument cluster.
NOTE: In order to view the diagnostic codes on the
instrument cluster, the Check Engine (MIL) icon
must be illuminated.
1. Place the transmission in PARK.
2. Turn the ignition switch to the "ON" position.
3. Toggle through the LCD display using the "SELECT"
button until the Check Engine (MIL) icon begins flashing.
4. When the Check Engine (MIL) icon is flashing, a set of two
numbers will appear on the LCD.
5. The first number is located in the information area and can
be 2 to 6 digits in length. This number represents the
Suspect Parameter Number (SPN).
6. The second number is located in the clock area and can be
1 to 2 digits in length. This number represents the Failure
Mode Identifier (FMI).
Component
Throttle Position Sensor (TPS)
Engine Temperature Sensor (ECT)
Intake Air Temperature (T-MAP)
Manifold Absolute Pressure Sensor
(T-MAP)
Crankshaft Position Sensor (CPS)
Vehicle Speed Signal
Gear Sensor Signal
DIAGNOSTIC TROUBLE CODE TABLE
Condition
Voltage Too High
Voltage Too Low
Voltage Too High
Voltage Too Low
Temperature Too High
Engine Overheat Shutdown
Voltage Too High
Voltage Too Low
Voltage Too High
Voltage Too Low
Signal Out of Range
Circuit Fault
Plausibility Fault
Plausibility Fault
Voltage Too Low
Voltage Too High
Signal Fault
ELECTRONIC FUEL INJECTION
7. Use the "Diagnostic Trouble Code Table" as a reference.
8. Press and hold the "MODE" button to cycle through all
currently active trouble codes.
PS MIL
SPN
MIL
NOTE: On vehicles equipped with power steering,
the power steering (MIL) LED will illuminate and
blink in place of the Check Engine (MIL) if there is a
diagnostic problem with the power steering system.
SPN
Suspect Parameter Number
51
51
110
110
110
110
105
105
102
102
102
636
636
84
523
523
523
FMI
FMI
Failure Mode Indentifier
3
4
3
4
16
0
3
4
3
4
2
8
2
2
4
3
2
3.25
3