Efi Diagnostics - Polaris 2012 RANGER RZR 570 INTL Service Manual

ELECTRONIC FUEL INJECTION

EFI DIAGNOSTICS

Instrument Cluster Trouble Code Display
NOTE: The diagno stic mode is
when the check engine MIL has been activated.
Use the following procedure to display diagnostic trouble
codes that wer e a ctivated du ring cur rent ignitio n cycle
causing the MIL to illuminate. Diagnostic trouble codes will
remain stored in the gauge (even if MIL turns off) until the
key is turned off.
NOTE: If t here is a diagno stic prob lem with t he
power st eering s ystem, t he power s teering MIL will
illuminate and blink in place of the check engine MIL.
1. If t he tro uble co de(s) ar e not dis played, use th e
MODE button t o to ggle un til "C K ENG" dis plays on
the information display area.
2. Press an d ho ld th e MODE bu tton to en ter the
diagnostics code menu.
4.34
3. A set of three numbers will appear in the information
accessible on ly
4. If more than one code exists, press the MODE button
5. To exit the dia gnostic mode, press and ho ld th e
9923523 - 2012 RANGER RZR 570 Service Manual
© Copyright 2011 Polaris Sales Inc.
area.
• The first number (located far left) can range from 0
to 9. Th is n umber re presents th e t otal nu mber o f
trouble code present (example: 2 means there are
3 codes present).
• The second number (located top right) can be 2 to
6 dig its in leng th. This num ber equates to th e
suspected area of fault (SPN).
• The third number (located bottom right) can be 1 to
2 digits in length. This number equates to the fault
mode (FMI).
to advance to the next trouble code.
MODE button or turn the ignition key OFF once the
codes are recorded.











