Installation Procedures - Asus (WL-330) User Manual

2.2.2

Installation procedures

Follow these instructions to install the ASUS Pocket Wireless AP.
Access point mode (DC power)
1. Connect one end of the RJ-45 cable to the Ethernet port of the device.
2. Connect the other end of the RJ-45 cable to the 10Base-T port of a
network hub, switch, router, or wall patch panel.
3. Insert the universal power adapter plug to the DC-IN socket of the device.
4. Connect the universal power adapter to a wall socket.
5. Insert the power plug to the DC-IN socket of the network hub, switch, or
router.
6. Plug the power adapter of the network hub, switch, or router to a wall
socket.
Use only the power adapter and plug that came with the ASUS Pocket
Wireless APpackage. Using other power adapter and plug may damage
the device.
ASUS Pocket Access Point (WL-330)
6
4
5
Installation Installation
2 1 3
2-3