Replacing The Ethernet Cables Of Other Devices - Asus (WL-330) User Manual

3. Use the WLAN adapter software in your desktop PC or notebook to perform
a Site Survey. Make sure the desktop PC or notebook WLAN adapter is set
to Infrastructure mode.
4. Establish connection with the ASUS Pocket Wireless AP.
5. Set the IP configuration of the desktop PC or notebook to establish
connection to the Internet.
6. Check your connection.
4.3 Replacing the Ethernet cables of other
devices
Follow these instructions to replace your Xbox, PlayStation
network printer Ethernet cable connection with the ASUS Pocket Wireless AP.
1. Switch the device to Ethernet adapter mode using the mode switch. (Default
SSID: ANY)
2. Place the ASUS Pocket Wireless AP nearest the AP you wish to connect,
then turn on the device.
3. Connect one end of the RJ-45 cable to the Ethernet port of the device and
the other end to the Ethernet port of the Xbox, Playstation, SETUP-box, or
network printer.
If you failed to connect to an AP, press the reset button of the ASUS Pocket
Wireless AP for more than 5 seconds to load the default settings of the
Button Scan mode.
4. Set the IP configuration of the Xbox, Playstation, SETUP-box, or network
printer to establish connection.
5. Check your connection.
ASUS Pocket Wireless Access Point (WL-330)
Simple setup
®
2, SETUP-box, or
4-3