Replacing The Cable Connections Of Other Devices; Sharing Internet Connection With Other Computers - Asus 54Mbps Pocket Wireless Access Point WL-330g User Manual

4.3 Replacing the cable connections of other
devices
You can also use the WL-330g to replace your Xbox, PlayStation
set-top box network cable connection.
To do this:
1. Switch the WL-330g to Ethernet adapter mode using the mode switch.
(Default SSID: ANY)
2. Place the WL-330g nearest the AP you wish to connect, then turn on
the device.
3. Connect one end of the supplied RJ-45 cable to the Ethernet port of
the device and the other end to the Xbox, PlayStation
Ethernet port.
4. Set the IP address of the Xbox, PlayStation
establish connection to the local network. Verify your connection.
Make sure the WL-330g MAC cloning feature is enabled when using
the device in this setup. Use the Wireless Setting Utility to enable MAC
cloning. See page 3-24 for details on MAC cloning.
4.4 Sharing Internet connection with other
computers
Refer to the typical network configuration below and a table on the next
page for information on Internet connection sharing with other computers
in your office or home network.
Internet ADSL/Cable modem
Use the mode switch to set the WL-330g to AP mode before sharing an
Internet connection with other computers in your network.
ASUS Pocket Wireless Access Point (WL-330g)
®
2, or set-top box to
WL-330g Wireless computer
®
2, or
®
2, or set-top box
4-3