Table of Contents
Advertisement
To set the device as an Ethernet adapter
Make sure that you switched the WL-330g to Ethernet adapter mode
before launching the Wireless Setting Utility. Use the mode switch to
change the device operating mode.
1. The utility auto-detects and
displays the WL-330g Ethernet
adapter settings. Click Configure
to continue.
2. Log on to the configuration
window using the password
(admin), check the Remember
my password option, then click
OK.
3. Select a wireless network from
the Available Networks field,
then click Configure.
•
Each wireless network is
preceded by an icon for
easy identification. Refer
to the table on the next
page for icon indications.
•
Click Add to connect to
another wireless network
not listed in the field.
ASUS Pocket Wireless Access Point (WL-330g)
3-7
Advertisement
Table of Contents
