Asus 54Mbps Pocket Wireless Access Point WL-330g User Manual page 59

Firmware Upgrade page
Refer to page 3-19 for details.
Restoring the default values
The following are the default values of the ASUS Pocket Wireless AP
(Ethernet adapter mode). You may restore these values by pressing the
reset button for more than five seconds.
Parameter
Wireless Interface
SSID .................................................................. ANY
Operating Mode ................................................. Infrastructure Mode
Channel ............................................................. Auto
Station Mode ..................................................... 802.11b/g
Transmission Rate ............................................. Automatic
Preamble ........................................................... Long
Authentication Method ....................................... Open System
Encryption .......................................................... None
MAC Cloning ..................................................... Disabled
Button Scan Mode
Enable Buttong Scanning .................................. Enabled
Scan Mode ........................................................ Find the connection with the
.......................................................................... strongest link quality
Specified Profile ................................................. No Saved profile
ASUS Pocket Wireless Access Point (WL-330g)
Default value
3-35