Asus (WL-330) User Manual page 22

Installation
Ethernet adapter mode (USB bus power)
1
1. Connect one end of the RJ-45 cable to the Ethernet port of the device.
2. Connect the other end of the RJ-45 cable to the Ethernet port of your PC
or notebook.
3. Insert the USB cable plug to the DC-IN socket of the device.
4. Insert the other end of the USB cable to any available USB port in your
PC or notebook.
After installation, check the Power and Ethernet LEDs. These LEDs light up
to indicate that the device is on and has physical connection to an Ethernet
network. Refer to the LED indications on page 1-5.
2-4
4
3
ASUS Pocket Access Point (WL-330)
2