Specifications - Hitachi M 12VC Technical Data And Service Manual

5. SPECIFICATIONS

Model
Collect chuck capacity
Type of power source
Voltage and input
Type of motor
Insulation method
Enclosure
Main body stroke
Speed No-load
Full-load
Weight
Standard accessories
M 12VC, M 12SC, KM 12VC, KM 12SC
1/2" and 1/4"
Single-phase AC 60 Hz
120 V, 11 A
Single-phase AC commutator motor
Single insulation
Head cover (B)
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Housing, stator holder, head cover (A)
66 mm (2.6") (Plunge base type)
8,000 to 24,000/min. (M 12VC, KM 12VC)
24,000/min. (M 12SC, KM 12SC)
8,000 to 23,000/min. (M 12VC, KM 12VC)
23,000/min. (M 12SC, KM 12SC)
7.3 lbs. (3.3 kg) with fixed base
9.9 lbs. (4.5 kg) with plunge base
M 12VC/SC
1/2" collet chuck ....................................................................................... 1
1/4" collet chuck ....................................................................................... 1
23 mm wrench ......................................................................................... 1
16 mm wrench ......................................................................................... 1
Template guide adapter ........................................................................... 1
Template guide centering adjuster ........................................................... 1
KM 12VC/SC
1/2" collet chuck ....................................................................................... 1
1/4" collet chuck ....................................................................................... 1
23 mm wrench ......................................................................................... 1
16 mm wrench ......................................................................................... 1
10 mm wrench ......................................................................................... 1
Template guide adapter ........................................................................... 1
Template guide centering adjuster ........................................................... 1
Template guide (porter cable type) .......................................................... 7
Chip shield ............................................................................................... 1
Diameter of large sub base ...................................................................... 1
Case ......................................................................................................... 1
--- 4 ---
Nylon resin
Diecast aluminum alloy
• • • • • • • • • • • • •
(silver metal plating)