6.2.2
6.2.2
6.2.2
Creating a RAID 10 set
Creating a RAID 10 set
Creating a RAID 10 set
6.2.2
6.2.2
Creating a RAID 10 set
Creating a RAID 10 set
You can create a RAID 10 set using four identical hard disk drives.
To create a RAID 10 set using the E a s y C o n f i g u r a t i o n
1.
From the utility main menu, highlight C o n f i g u r e
2.
Use the arrow keys to select Easy Configuration
3.
The ARRAY SELECTION MENU
ARRAY SELECTION MENU
ARRAY SELECTION MENU
ARRAY SELECTION MENU displays the available drives connected
ARRAY SELECTION MENU
to the SATA ports. Select the drive(s) you want to include in the RAID
set, then press <SpaceBar>. When selected, the drive indicator changes
from R E A D Y
R E A D Y to ONLIN A[X]-[Y]
R E A D Y
R E A D Y
R E A D Y
the drive number.
The information of the selected hard disk drive displays at the bottom of
the screen.
A S U S R S 1 2 0 - E 3 / P A 4
A S U S R S 1 2 0 - E 3 / P A 4
A S U S R S 1 2 0 - E 3 / P A 4
A S U S R S 1 2 0 - E 3 / P A 4
A S U S R S 1 2 0 - E 3 / P A 4
E a s y C o n f i g u r a t i o n
E a s y C o n f i g u r a t i o n option:
E a s y C o n f i g u r a t i o n
E a s y C o n f i g u r a t i o n
Easy Configuration, then press <Enter>.
Easy Configuration
Easy Configuration
Easy Configuration
ONLIN A[X]-[Y], where X is the array number, and Y is
ONLIN A[X]-[Y]
ONLIN A[X]-[Y]
ONLIN A[X]-[Y]
C o n f i g u r e
C o n f i g u r e
C o n f i g u r e, then press <Enter>.
C o n f i g u r e
6 - 1 1
6 - 1 1
6 - 1 1
6 - 1 1
6 - 1 1