Table of Contents
Advertisement
6.4
Global Array Manager
You may also create a RAID set(s) in Windows
the Global Array Manager (GAM) application. The GAM application is available
from the motherboard support CD.
Refer to the GAM user guide in the motherboard support CD for details.
6.5
Rebuilding the RAID
This option is only for the RAID 1, RAID 5 and RAID 10 level.
Rebuilding the RAID with other non-RAID disk:
1.
If one member of physical SATA Hard disk within the array is off-line or
failed, the status of array will become to be degraded from normal. The
following displays as:
2.
Press <Ctrl-I> to enter the Intel Matrix Storage Manager RAID configuration
utility after POST.
3.
If there is available Non-RAID SATA Hard Disk, the utility will prompt the
windows for rebuilding the RAID. Press <Enter> to select the port of
destination disk for rebuilding or press <ESC> to exit
The size of destination disk for rebuilding should be the same or bigger as
the original hard disk.
A S U S R S 1 2 0 - E 3 / P A 4
A S U S R S 1 2 0 - E 3 / P A 4
A S U S R S 1 2 0 - E 3 / P A 4
A S U S R S 1 2 0 - E 3 / P A 4
A S U S R S 1 2 0 - E 3 / P A 4
operating environment using
®
6 - 3 9
6 - 3 9
6 - 3 9
6 - 3 9
6 - 3 9
Advertisement
Table of Contents
