D-Link DIR-822 User Manual page 27

Section 3 - Configuration
Step 2: Select Your Time Zone
Select the appropriate time zone for your location. This information is
required to configure the time-based options for the router.
Click Next to continue.
Step 3: Internet Connection
Here you will be able to configure the Internet connection used by this
device. If your ISP connection is listed in the drop-down menu select it and
click Next. If your ISP connection is not listed then you can proceed to select
any of the other manual Internet connection methods listed below.
The following parameters will be available for configuration:
Dynamic IP Address:
PPPoE:
PPTP:
L2TP:
Static IP Address:
D-Link DIR-822 User Manual
Choose this if your Internet connection
automatically provides you with an IP address.
Most cable modems use this type of
connection.
Choose this option if your Internet connection
requires a PPPoE username and password to
get online. Most DSL modems use this type of
connection.
Choose this option if your Internet connection
requires a PPTP username and password to get
online.
Choose this option if your Internet connection
requires an L2TP username and password to
get online.
Choose this option if your Internet service
provider provided you with IP address
information that has to be manually
configured.
23