D-Link DIR-822 User Manual page 69

Section 3 - Configuration
My IPv6 Connection: Select Autoconfiguration (Stateless/DHCPv6) from
the drop-down menu.
IPv6 DNS Settings: Select either Obtain DNS server address automatically
or Use the following DNS Address.
Primary/Secondary DNS Enter the primary and secondary DNS server addresses.
Address:
LAN IPv6 Address:
Enter the LAN (local) IPv6 address for the router.
LAN Link-Local Address:
Displays the router's LAN link-local address.
Enable Automatic IPv6
Address Assignment: Click to enable Automatic IPv6 Address Assignment.
Enable Automatic
DHCP-PD in LAN:
Click to enable Automatic DHCP-PD in LAN.
Enable
Check to enable the autoconfiguration feature.
Autoconfiguration:
Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC
Autoconfiguration Type:
+ Stateless DHCPv6.
IPv6 Address Range Enter the start IPv6 address for the DHCPv6 range for
Start: your local computers.
IPv6 Address Range Enter the end IPv6 address for the DHCPv6 range for
End: your local computers.
IPv6 Address Lifetime: Enter the IPv6 address lifetime (in minutes).
D-Link DIR-822 User Manual
Autoconfiguration
65