D-Link DIR-822 User Manual page 28

Section 3 - Configuration
Step 3: Internet Connection (Dynamic IP Address)
After selecting the Dynamic IP Address Internet connection method, the following page will appear.
The following parameters will be available for configuration:
MAC Address:
Clone Button:
Host Name:
Primary DNS Address:
Secondary DNS Address:
Click Next to continue.
Step 3: Internet Connection (PPPoE)
After selecting the PPPoE Internet connection method, the following page
will appear:
The following parameters will be available for configuration:
User Name:
Password:
Click Next to continue.
D-Link DIR-822 User Manual
Enter the MAC address of the Internet gateway
(plugged into the Internet port of this device) here.
If the configuration PC also acts as the Internet
gateway, then click on the Clone Your PC's MAC
Address button to copy the PC's MAC address into
the space provided. If you're not sure, leave the
MAC Address field blank.
Enter the host name used here. If you do not have
or know this information, please contact your ISP.
Enter the Primary DNS IP address used here.
Enter the Secondary DNS IP address used here. This
field is normally optional. Only one DNS address is
required for a functional Internet connection, but
using a second DNS address provides more
stability.
Enter the PPPoE account user name used here. This
information is given by the ISP.
Enter the PPPoE account password used here. This
information is given by the ISP.
24