Table of Contents
Advertisement
5. Switching Function for Units of Measurement
Pressing the | Function] key allows the user to switch the unit of measurement to [g], [ct], [%], and so
on.
Up to five different units can be registered for use only when the function key is properly set on a
balance for which the lock switch is off.
5.1
Switching Units of Measurement
Switching the units of measurement to be displayed
Press the [ Function | key.
Each press advances through the units
of measurement to be displayed.
s&The balance is shipped from the
factory with the following default
setup: [g] -> [ct] -> [Pcs] -> [%] -» [g]
—
>
•
•
•
5.2
Setup of Units of Measurement (Only when the lock switch is off)
When values [8 1.5. u.] to [8 5.5. u.] are entered prior to use, the desired unit of measurement to be
displayed can be chosen simply by pressing the [ Function"! key- For more information on the units
of measurement that can be set here, please refer to "4.2 Description of Functions" on page 13.
Example:To change the default factory settings to pound units, use [BE. S u ] in the factory
settings.
1
Display the function item [8 c'. 5. u. I
L
l]
Press and hold down the [ Function |
key.
Release the key as [/- u n c ] appears
on the display.
The function setup mode is now
activated and the first item is displayed.
Press the | Function! key several more
times, until [5'c! 5. u. I '-/] appears.
2
Setting the unit to a pound
8E.5.U.
8E.S.u. 15
Press the | Zero/Tare | key several
times to specify [8c'. 5.u.
IS]-
15
Advertisement
Table of Contents
