Setup Of Limit Values By Actual Quantity Loads - Hitachi AJ-CE series Operation Manual

8.2 Setup of Limit Values by Actual Quantity Loads
1 Starting the limit function
L. SEt
Continuous pressing
Key released
Press and hold down the | Set | key.
Release the key when [L. 5 E t ] is
displayed.
The currently set lower-limit value
flashes.
2 Loading the sample for the lower-limit value
•4*
\ \ \ I /.
n n n n .
u. u u u i
/ / I \ \
Load the sample of the lower-limit value
on the measurement pan.
3 Saving the lower-limit value
3.8 3 Sg
y u
Press the | Memory | key.
After the lower-limit value has been
saved, the balance displays it briefly and
proceeds to the following setup,
i&lf One-point setup was chosen, the
setup is complete.
4 The upper-limit value
setup
H. SEt
M
\ \ \
anoo
The display now changes to
[K SEt], indicating that the upper-
limit value can be set.
The currently set upper-limit value
flashes.
5 Loading the sample of the upper-limit value
\ \ I / / /
n n n n „
U.UUU g
/ I I \ \ s
6 Saving the upper-limit value
Load the sample of the upper-limit value
on the measurement pan.
Press the | Memory | key.
After saving the upper-limit value, the
balance displays it briefly and
terminates the setup.
24