Stop And Go - Miele CERAMIC COOKTOP WITH INDUCTION KM 5753 Operating And Installation Instructions

Safety features

Stop and Go

Your appliance has a Stop and Go
feature which, when activated, reduces
the power of all burners that have been
switched on.
If you then deactivate the feature, the
burners will automatically return to the
previous level.
If the feature is not deactivated, the
cooktop will turn off after 1 hour.
If you wish to use this feature, you will
need to alter the factory setting (see
"Programming - P1").
To activate Stop and Go:
^ Press and hold the sensor $ until you
hear two consecutive beeps.
Be careful not to continue touching
the $ sensor for too long, as this will
activate the safety lock.
The Child Safety Lock indicator will
flash. The power for the activated
burner(s) will reduce to level 1, and 1
will appear in the respective display.
When activating "Stop and Go":
– the countdown of the programmed
time for the automatic switch-off
function will be interrupted. When
deactivating "Stop and Go", the
countdown will continue,
– the timer will continue without
interruption.
28
To deactivate Stop and Go:
^ Press and hold the $ control until the
indicator goes out.
The burners will now run at the level
previously set.